[nieuws_table=https://www.synthforum.nl/forums/attachment.php?attachmentid=35422&stc=1&d=1202669914]
Modcan komt met een quad lfo met de volgende functies:
meer info[/nieuws_table]
Modcan komt met een quad lfo met de volgende functies:
- Four independent LFOs
- Eight wave shapes
- Voltage control of Frequency, Amplitude (Level), Transformation per LFO channel
- +/- CV Amount programmable per channel for each of the above modulation destinations
- Output polarity switch +/-5V, 0-+5V or inverted 0- -5V programmable for each channel
- Reset enable for each channel- pulse at the Gate Input Jack resets LFOs with Reset enable
- Freeze function. As long as the Gate Input jack is held high the Freeze enabled LFO will effectively hold (Freeze) at the last voltage prior to gate high.
- LFO channel to edit is set with EDIT control knob.
- Wave button has double function. When depressed and held the LFO status LEDs indicate the wave number used for the selected channel.
When wave button is depressed simultaneously with the mode button all panel and channel settings are internally stored for next time the module is powered on. - Three distinct modes of operation.
* Normal – standard 4 independent LFOs with modulation etc.
* Quadrature- Each of the four LFOs is in quadrature at 0, 90, 180, 270 degrees.In this mode, LFO channel 1 overrides all settings and the remaining LFOs are quadrature versions of the settings on Channel 1.
* Rotate Mode- A pulse at the Gate input rotates each LFO channel output one step to the right with the 4 th wrapping back to 1. This allows for some interesting routings to other modules as the LFOs swap outputs.
meer info[/nieuws_table]
Attachments
Last edited by a moderator:
