hier de omschrijving van de 6 1/2 inch woofer .
high performance midwoofer with a cast aluminum frame, suitable for use in mid-sized ported and sealed cabinets. It has an exponentially flared polypropylene cone, concave/flat polypropylene dustcap, rubber surround for excellent cone termination. The driver has an aluminum former with a 4 layer copper wound voice coil for high power handling. A progressive spider with flat landing attachment is used to ensure linear suspension operation. The motor uses a neodymium magnet mounted on the pole to create an extremely compact, inherently video shielded motor structure. The motor uses our patent-pending motor for extreme linearity over the entire range of motion. This motor yield a very high motor force factor of 9 Newtons per Ampere, and maintains over 90% of its peak force over the center 20mm of excursion. Combined with a linear excursion rating of 13mm one way this motor yields the highest level of low distortion stroke available in any 6.5”/7” woofer on the market today. The flat progressive spider and soft rubber surround combine to yield an extremely linear suspension as well. Suspension compliance has less than a 25% change over the center 20mm of excursion, and provides a full 26mm of peak to peak throw capability to equal that of the motor. Inductance nonlinearities are kept to a minimum by the use of a full copper sleeve on the pole. This sleeve is a full 1mm thick copper ring that extends 9mm beyond the top plate. The result is a very low inductance of 0.13 mH, and inductance that does not change by more than 15% over the entire usable range .