Otlen
Lid
Ok ik ga voor de MMT-8.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Ik zocht een polyfone... de SQ-10 is niet polyfoon.Korg SQ-10
Ja ok... 3*mono=3 stemmig..de Korg SQ-10 is 3 stemmig polyfoon.
Ok, dat klinkt alvast goed.
Heb je zo'n ding, werkt het een beetje aangenaam ?
De Q960 is erg leuk maar koop ook de utilty modules er bij!
De gate lengte bedoel je?
Daar heb je nou dus die handige utilty modules voor
Weet iemand hoe je er zelf een bouwd?
Duty Cycle Jumper/Pot
The Q960's oscillator output is fixed at 90% like the Moog 960. Changing the duty cycle can produce profound results when controlling envelope generators.
On the circuit board there is a jumper and a 3-pin connector for a 100K pot. By removing the jumper and adding the 100K Pot, the duty cycle can be varied from 10% to 90%. The pot can be mounted to the front panel (Drilling required), mounted to a blank panel next to the Q960, or simply left hanging behind Q960 panel. This is not an option we offer and would have to be installed by the customer.
Another option is to connect a Jack TIP to the center pin (Pin 2) of the 3-pin pot connector for Voltage Control. No need to connect ground on the Jack as the panel will sufice. Make sure the jumper is ON in this situation so it will default to 90% when the external voltage control signal is removed. The voltage required is 0 - 5V. The voltage source could be a Q125 signal processor or any signal as long as you stay within 0 - 5V. Outside that range will result in 0% or 100% duty cycle. This is not an option we offer and would have to be installed by the customer.
Om even terug on-topic te gaan (analoge sequencers), ik heb m'n Spectralis verkocht en denk ernstig eraan m'n synthesizers.com setup uit te breiden met diens Moog 960 cloon.
Lijkt me toch echt fantastische waarde voor je geld.
Weet iemand hoe je er zelf een bouwd?