Introducing the Prophet ’08 Pot Edition

Ik denk dat dit wel heel wat mensen blij zal maken;

By Popular Demand: Introducing the Prophet ’08 Pot Edition
May 20, 2009—Since the release of the Prophet ’08 in August 2007, we have received numerous requests for a version with more “vintage-style” controls. The standard Prophet ’08 primarily uses rotary encoders for its front panel controls, but some customers prefer potentiometers (AKA “pots”) like those used on the vintage Prophets, particularly for the more performance-oriented parameters like filter cutoff and resonance. The new Prophet ’08 Pot Edition offers an alternative with 38 of the 52 front panel parameters controlled by pots; rotary encoders are still used for the remainder of the controls. (List of parameters and their control type.)

So, what’s the difference? The features and functionality of the non-pot and pot versions are exactly the same. The difference is strictly in the controls themselves. Encoders are “endless”—they have no minimum or maximum limit. The advantage to that is that when you edit a preset parameter, the change begins at the preset value and increases or decreases, depending upon the direction turned. Pots typically have about 270° of travel and have definite limits. The advantage to that is that you know, by feel, where the minimum and maximum limits are and you can sweep through the entire value range in less than one full turn.

The Prophet ’08 PE features three edit modes for the pots: Relative, Passthru, and Jump. In Relative mode, the value change is relative to the preset value. In Passthru mode, turning the pot has no effect until after the edited value equals the preset value (that is, until the edited value “passes through” the stored value). Jump mode uses an absolute value based upon the position of the pot when edited; turn a pot and the value jumps immediately from the stored value to the edited value.

The Prophet ’08 PE melds the best of the “old school” with the modern features and affordability of a new generation.

The MSRP of the Prophet ’08 Pot Edition is $2,309.00 and it is available now. Photos and more information will be available on the site very soon.

Zie ook de thread; https://www.synthforum.nl/forums/showthread.php?t=104240&page=7
Dave Smith Instruments; http://www.davesmithinstruments.com/news/index.php#p8pe
 
Laatst gewijzigd:
pol-pot2.jpg


Ik zeg toch... beter dan encoders!
 
Ik had het bericht al gezien maar ik dacht dat het toch groot nieuws was aangezien er zoveel mensen over klagen en bewust niet kopen alleen hierom.
Aan de andere kant zijn er toch nog een heleboel analoge synth fabrikanten die wel goeie knoppen hebben en de synths goed klinken dus je bent niet verplicht voor DSI te kiezen. Ik zit in dezelfde situatie met een aantal synths waar ze een 'mark II' van uitgebracht hebben. Ook zou er een gratis of aanvaardbaar geprijsde upgrade beschikbaar moeten zijn!
 
Dan had je ook wel een linkje naar het topic toe kunnen voegen en eentje naar de site waarvan die quote afkomstig is. Da's netter dan.
 
Aangepast! Sorry mijn eerste nieuwsbericht, zal er in het vervolg rekening mee houden...
 
Wat is het verschil in prijs tussen een Pot en een Deoxit edition?
 
Als je alle borden moet vervangen, koop je zo'n beetje een hele nieuwe synth. Kun je dus beter je oude '08 inruilen voor een PE lijkt me.
 
Ik heb de panelboards al een keer vervangen, is een klusje van niks. De knoppen zitten op andere borden dan de audioengine en het CPU gedeelte enzo. Zie de 'Prophet '08 knoppenkwaliteit'-draad in the Synthhardware deel.
 
Antwoord op mijn vraag of er een upgrade voor bestaande gebruikers in de pijplijn zit:

"It will probably be offered as a kit, but we haven't figured out all the details yet. It won't be inexpensive, probably around $300. The panel boards are easily replaced, but a minor modification of the main board is also required. Two small surface mount parts need to be removed and a jumper added. It is not difficult for someone with soldering skills."

Ik ben benieuwd :)
 
Ik vind het eigenlijk ook best prijzig, al zal je oude Deoxit versie verkopen op de 2de hands markt en er een nieuwe Pot Edition voor terugkopen waarschijnlijk duurder zijn.
 
Dit staat enkele dagen op de DSI-website:
PE Conversions Now Available

June 2, 2009—We are now offering two options for converting standard Prophet '08 Keyboards to the Prophet '08 PE. A kit is available for intrepid do-it-yourselfers or keyboard techs to install. (Read the Prophet '08 PE Conversion Instructions for details.) You can also return your Prophet to us to have the work done. The kit is $249.00 plus shipping. Factory installation is $299.00 plus shipping. Both items can be purchased from our Web store.
 
Ik hou het voorlopig even bij mijn gefixte Deoxit versie, maar mochten de problemen buiten de garantieperiode terugkomen ga ik wel in zo'n upgrade investeren denk ik.
 
Back
Top