Machinedrum OS 1.12.V/S 1.20

[ELectronic SKIL]

Kan iemand mij vertellen wat de verschillen zijn tussen OS versie 1.12 en 1.20 van de machinedrum!

Dank u!

 

[divi]

als 'k mij niet vergis zit er een text file bij de releases waar de updates in staan, nee?

 

[RoelRoel]

Bugfixes
--------

When pressing enter to set a new row in song mode the pattern position
was not set to the beginning of the pattern as it should. Fixed.

Notes from the MIDI Machines could be played at a note position +/-1
semi note from its correct position. Fixed.

When pressing stop and in pattern chain mode, the chain would either
be cleared or the wrong pattern was loaded. The chain was not
restarted as it should be. Fixed.

When entering realtime rec on a track with notes programmed and
previously having turned an encoder a lock could be programmed on the
first note although no encoder was turned during realtime rec. Fixed.

When setting a lock on the CTR-AL or CRT-8P machines the kit
value was changed along with the lock, only the lock should have be
set. Fixed.

If pattern length was set in stop or a position before the new end
position the length was not updated on the first looping. Fixed.

When receiving a MIDI Start in Song Mode the first beat didn’t play.
Fixed.

When sending Global Slot via sysex with certain settings the sysex
would give an error 2 on receiving or verifying. This bug surfaced on
os 1.19. Fixed.

Updates
-------

When a mute is pending with function held in mute mode parameter
changes for all tracks (inverted digits) is not active.

The LFO are disabled for tracks with CTR-AL & CTR-8P machines. Since
it cannot be fully controlled. Though you can still use an LFO from
another track to control the CRT-AL & CRT-8P machines.

The parameters NOTE, N2, N3, LEN and VEL in the MIDI machines are now
controllable by the LFO.

Als je echt alles wilt weten moet je hem ff downloaden en dan dat tekstbestand wat erbij zit lezen.

 

[ELectronic SKIL]

Mijn vader is het weekend weg, en ik kan dan niks downloaden, vandaar dat ik deze oerdomme vraag stelden!

Bedankt!

Alles op de indirecte manier~!

 

[divi]

Origineel geplaatst door ELectronic SKIL
Mijn vader is het weekend weg, en ik kan dan niks downloaden, vandaar dat ik deze oerdomme vraag stelden!

Bedankt!

Alles op de indirecte manier~!

terwijl je op dit forum rondsurft ben je toch de hele tijd webpages aan 't downloaden hoor...

 

[ELectronic SKIL]

Ik kan geen bestanden op de computer zetten,

Daar is tie tegen beveiligd!

 

[Rvooh]

steek een diskette in je computer en download naar die diskette


of...

bel je pa


of...


wacht

 

[ELectronic SKIL]