Dit is van z'n page
Auxillary panel <|||> MS-02 and MS-03 <|||> MS-911 (modded X-911 !!!)
SQ-10 <|||> MS-50 <|||> MS-10 w/ no keyboard
MS-10 <|||> MS-20 <|||> VC-10
En dit heeft die gedaan met de X-911
This is a Korg X-911 that I have re-built to a modular synth. The original X-911 Guitar Synth actually contains much more than is obvious on the front panel:
# 1 pre-amp, dist unit, P-V converter and envelope follower/trig detector
# 1 multi-waveform, multi-octave output MS-20-style VCO with both lin and log CV
# 1 MS-20-style VCF
# 3 MS-10-style VCF:s (discrete KORG35) used by the Bass, Tuba and Trumpet presets.
# 8 VCA:s
# 9 simple EG:s
I have made most of these modules accessable at the front panel and layed out like a modular synth. The synth is then packed into a chassis that fits nicely in my MS-rack. The modules are pre-patched like the original 911. VCF 3 and 4 also have a LPF/HPF switch. The modules are:
# 1 x External Signal Processor: Input level, Range, Portamento knobs. Input, Dist out, Env out, Trig out, Hz/V out jacks.
# 1 x VCO: Octave, Coarse, Fine, CV1, CV2, 8" PWM, 16" PWM knobs. Hz/V, V/oct, CV1, CV2, 8" PWM, 16" PWM inputs, 16" sqr, saw, pulse, 8" sqr, saw, pulse, 4" sqr, saw output jacks.
# 4 x VCF: Cutoff, Resonance and Env CV knobs. LPF/HPF switch on VCF 3 and 4. Input, output, Env and CV jacks.
# 2 x Active filter: Tone knob, Input and output jacks.
# 6 X VCA: Input and output jacks.
# 2 x AR Envelope: Attack and Release knobs, Trig in, output jacks.
# 3 x D Envelope: Decay knob, Trig in, ouput jacks.
# 1 x 8 input mixer: Level knobs, input jacks.
# 1 x Output module/VCA: Volume and CV knobs, CV in and out
Als je vragen over dit alles hebt moet je Leo ff pb'en