Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Origineel geplaatst door pal
hier nog een oberkorntje
Oberkorn is a fully fledged professional analogue sequencer providing plenty of control output and inputs and with
some uniquely creative features never before seen. Whilst most new analogue sequencers only offer a limiting 8
steps, the Oberkorn offers the all important 16 steps. It is a multi-channel true analogue sequencer with some remarkable features.
Main features:
* 3 separate Control Voltage channels. Each has a range switch providing approx. 2.5V, 5V and 10V CV ranges.
* 5 separate Gate channels. 3 of the gate channel switches are built into the CV pots. The remaining 2 are on a
separate row of toggle switches. The switches are 3 position providing the 2 Gate outputs, with centre being off.
* Gate channel C is in `Legato mode'. More on this later.
* Clear step LEDs. The 16 step LEDs are colour coded so locating whole note steps is easy.
* 8 channel MIDI to Trigger/Gate converter (with an additional 3 spare channels available internally for those who
wish to do modifications.
* MIDI Sync cabability, but using a MIDI note instead of MIDI clock. This method has major, important advantages
covered in manual.
* MIDI/CV control of the multiplexer (the multiplexer, or Mux, controls which step the sequencer is on). This is a major
new and unique facility that allows any of the 16 steps to be played in any order and any direction, missing out or
duplicating steps at will. Please read full details about this important creative tool later in the manual. When using this
feature, it is possible to activate `legato mode' for all gate channels.
* Ability to lock onto your MIDI sequencer to the nearest 16th note, whether stopping, starting, or jumping to another
bar in your MIDI sequencer. Will lock on perfectly regardless.
* Reset to 16. Just about all other analogue sequencer have an inherant error, in that after reseting the machine
(to step 1), when restarting the sequencer, it actually starts on step 2! With our Reset to 16, this problem is overcome.
Origineel geplaatst door RednoiZ
Mooi ding!
De meeste sequencers hebben een gebufferde output.Origineel geplaatst door richard2000
Effe een technisch vraagje tussendoor ,
Hoe zwaar kan je zo'n CV output van een analoge seqeuncer belasten, dwz mag een VCO een beetje stroom trekken zonder dat de CV spanning inzakt?
Ik hoef niet exact de stroomsterktes te weten maar ik vraag me af hoe zo'n seqeuncer gebufferd is aan de uitgang, of daar bv nog serieweerstanden in zitten.
Origineel geplaatst door JohnnyBusca
De meeste sequencers hebben een gebufferde output.
Origineel geplaatst door Hooihuis
Er staat deze maand trouwens een review van de Sequentix P3 in de SOS, for what it's worth....wel een mooie machine hoor; eenvoudig qua opzet maar enorm veel mogelijkheden. Lijkt me echt iets voor mij en ik zit er ook over te denken, maar ergens vind ik het wel aan de prijzige kant.
Origineel geplaatst door klausito
...
.... En tot overmaat van ramp wordt volgens mij hierdoor de microprocessor van de MC wat overbelast want soms springt hij na een tijdje op de metronoom piepjes en wordt hij niet meer juist getriggerd.
....
Origineel geplaatst door mono-poly
sync en cv/gate zijn 2 totaal andere dingen.
het ene zorgt dat de sequencer synct en het andere stuurd bv de noten aan.
en ik denk niet dat je voor 250 een mobius zal vinden.