Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
hmmm ik wil ook een x911 jij mazzelaar
of heb je de handleiding enkel nodig voor de nodige zelfbevredeging?
hmmm ik wil ook een x911 jij mazzelaar
of heb je de handleiding enkel nodig voor de nodige zelfbevredeging?
Moet je wel zelf ook nog een beetje moeite doen natuurlijk: http://www.performing-musician.com/readersads/AdBrowse.php?PageSize=80&Cat=7
.
Nope, heb er een sinds vorige week. Erg leuke bak, die echt erom vraagt om gemod te worden, want dat ding zit bomvol. Maar voorlopig maar eens zonder mods mee kutten.
Aangezien je hier een steenworp vandaan woont, mag je 'r best komen betasten hoor
waar is dat dan die steenworp?
.....kheb keertje pixies gezien van iemand die m egt dik mt 25+ knobbies extra had gemod .....
.
Erg leuke bak, die echt erom vraagt om gemod te worden, want dat ding zit bomvol.
Ik heb al iets gevonden:
MS911:
Beautiful custom KORG X-911 modularized into the KORG MS-911 via Perry.
“This is a Korg X-911 that I have re-built to a modular synth. The original X-911 Guitar Synth actually contains much more than is obvious on the front panel.”
Ben benieuwd of of alles cv/gate, +15V/-15V of +5/-5V is en hoe hard het interne geluid is?!?!?!?
This is a Korg X-911 that I have re-built to a modular synth. The original X-911 Guitar Synth actually contains much more than is obvious on the front panel:
# 1 pre-amp, dist unit, P-V converter and envelope follower/trig detector
# 1 multi-waveform, multi-octave output MS-20-style VCO with both lin and log CV
# 1 MS-20-style VCF
# 3 MS-10-style VCF:s (discrete KORG35) used by the Bass, Tuba and Trumpet presets.
# 8 VCA:s
# 9 simple EG:s
I have made most of these modules accessable at the front panel and layed out like a modular synth. The synth is then packed into a chassis that fits nicely in my MS-rack. The modules are pre-patched like the original 911. VCF 3 and 4 also have a LPF/HPF switch. The modules are:
# 1 x External Signal Processor: Input level, Range, Portamento knobs. Input, Dist out, Env out, Trig out, Hz/V out jacks.
# 1 x VCO: Octave, Coarse, Fine, CV1, CV2, 8" PWM, 16" PWM knobs. Hz/V, V/oct, CV1, CV2, 8" PWM, 16" PWM inputs, 16" sqr, saw, pulse, 8" sqr, saw, pulse, 4" sqr, saw output jacks.
# 4 x VCF: Cutoff, Resonance and Env CV knobs. LPF/HPF switch on VCF 3 and 4. Input, output, Env and CV jacks.
# 2 x Active filter: Tone knob, Input and output jacks.
# 6 X VCA: Input and output jacks.
# 2 x AR Envelope: Attack and Release knobs, Trig in, output jacks.
# 3 x D Envelope: Decay knob, Trig in, ouput jacks.
# 1 x 8 input mixer: Level knobs, input jacks.
# 1 x Output module/VCA: Volume and CV knobs, CV in and out
ok dan
dan moeten we inderdaad mischien maar een een aarbeien jam sessietje houden neem ik ook wat gear mee
Jep, die dus!! ......Ik had van Luigi het emailadres van deze gast gekregen, maar jammer genoeg bestaat zijn site en het emailadres niet meer
zijn er meer geintresseerde in deze mod?
Barno schreef:-alle oscillators aparte CV/Gates (of misschien zelfs wel een matrix waarin je
ze kan 'routen');
-alle osc's volumes met inderdaad vca's zou cool zijn, dus eingelijk een soort mixer
maar misschien is het al handig als ze allen een eigen output hebben;
-alle knoppen CV aan te sturen;
-van die ene PWM een PW (met CV) variabele;
later kom ik misschien nog wel op meer