WWW : A slide is a smooth change from one note to a different note. A tie is holding the same note for two or more steps
PRo-x
Sequencer
capable of recording notes, chords and parameters
Majority of the editing parameters can be recorded in the sequencer
64-steps, all parameters editable for each step
Accent, Tie and Gate
GLIDE
Adjusts the amount of portamento glide between 0% and 100%.
(Tb-303 60%!?)
Delay FX
TYPE (SHIFT + AMOUNT)
Selects between MONO, STEREO, DOUBLER, PING PONG and LCR. Stereo is the default delay.
TIME
Adjusts the delay tempo and division. When sync is off, the tempo goes from 1 ms to 350 ms without decimal
values. When sync is on, the values are 1/4, 1/8 T, 1/8 D, 1/8, 1/16 T, 1/16 D, 1/16, 1/32T, 1/32 D, 1/32 (some
divisions depend on the master tempo).
Synced values are the default.
Available time divisions depend on the delay type and BPM.
Depending on the type, separate L and R times might be shown.
FEEDBACK (SIZE knob)
Adjusts the delay feedback from 0% to 80% (where 100% is near auto oscillation).
FILTER
Adjusts the LPF cutoff from 20 Hz to 10000 Hz.
SYNC
Enables or disables the sync of the delay division to the master tempo
In theorie kun je dus met de delay FX als ik het goed begrijp ook een eind of zelfs verder komen.
Maar of de sequencer dit allemaal uitstuurt is dus wel een tweede..
PRo-x
Sequencer
capable of recording notes, chords and parameters
Majority of the editing parameters can be recorded in the sequencer
64-steps, all parameters editable for each step
Accent, Tie and Gate
GLIDE
Adjusts the amount of portamento glide between 0% and 100%.
(Tb-303 60%!?)
Delay FX
TYPE (SHIFT + AMOUNT)
Selects between MONO, STEREO, DOUBLER, PING PONG and LCR. Stereo is the default delay.
TIME
Adjusts the delay tempo and division. When sync is off, the tempo goes from 1 ms to 350 ms without decimal
values. When sync is on, the values are 1/4, 1/8 T, 1/8 D, 1/8, 1/16 T, 1/16 D, 1/16, 1/32T, 1/32 D, 1/32 (some
divisions depend on the master tempo).
Synced values are the default.
Available time divisions depend on the delay type and BPM.
Depending on the type, separate L and R times might be shown.
FEEDBACK (SIZE knob)
Adjusts the delay feedback from 0% to 80% (where 100% is near auto oscillation).
FILTER
Adjusts the LPF cutoff from 20 Hz to 10000 Hz.
SYNC
Enables or disables the sync of the delay division to the master tempo
In theorie kun je dus met de delay FX als ik het goed begrijp ook een eind of zelfs verder komen.
Maar of de sequencer dit allemaal uitstuurt is dus wel een tweede..