Te koop,
Doepfer Regelwerk. €300,-
In zeer goede staat.
Zelf voornamelijk gebruikt als sequencer. Maar dus ook te gebruiken als een hele uitgebreide midicontroller.
Wat info
function for each fader/button in clear words in the display (not only numbers or cryptic codes)
LED blinking frequency proportional to the distance of the desired/stored value
Different actualizing modes: immediate with adjustable threshold, relative (to stored value), catch (stored value has to be crossed)
Sys-Ex strings with a maximum length of at least 30 bytes, the fader controlled byte can be set anywhere within the string
Definition of maximum and minimum value of the fader-generated value (including inverted characteristics)
Manipulation of incoming MIDI-events (e.g. controlling the velocity of incoming note-events with one of the faders)
Possibility of fader groups with master-fader
typical applications of the buttons: sending any MIDI event (including Sys-Ex string), different events for press and release possible (e.g. note on/note off), actual fader value can be used for the event (e.g. velocity for note on/off), sending of actual fader value, mute, demute, solo
Auto-learn mode (learning of assigned MIDI event via MIDI In)
copy/move fader/button parameters
Sampling frequency of faders is adjustable
64 presets for the assignement of all faders and buttons, when calling-up a preset any MIDI string can be sent
64 pattern for the assignment of all sequencer parameters (patterns are compatible with SCHALTWERK)
all 64 presets and 64 patterns could be send /received over SysEx
128 snapshot memories (momentary values of alle faders and buttons)
Here some features in catchwords for the "Sequencer" Mode:
analog and trigger sequencer functions (similiar but reduced compared to SCHALTWERK and MAQ16/3)
8 tracks of 16 steps (only one track can be seen and edited at a time)
controls for a track: up to 16 buttons and LEDs
setting/resetting of steps by pressing the corresponding button while the pattern is running, resulting in lively structures changeable in real time
display of the active steps and the actual step
the following parameters can be controlled in real time with the faders of the sequence-section: note number, note velocity, end step (i.e. length of the track) and many more
synchronisation internal/external (via MIDI clock or SYNC socket)
MIDI and CV/Gate outputs at the same time
General features:
2 MIDI In, 2 MIDI Out, SYNC (Roland compatible)
8 CV outputs (3.5 mm miniature jack sockets), function only in sequencer mode, range: 0...+5V, 1V/Octave characteristics
8 Gate outputs (3.5 mm miniature jack sockets), function only in sequencer mode, voltage gate 0/+5V light grey 19" case, 5 height units
24 faders (60mm), 72 buttons, 56 LEDs, 2-line LC-display, rotary encoder for data input
optically similiar to SCHALTWERK, MAQ16/3, A-100, MS-404, MCV24 and so on
Doepfer Regelwerk. €300,-
In zeer goede staat.
Zelf voornamelijk gebruikt als sequencer. Maar dus ook te gebruiken als een hele uitgebreide midicontroller.
Wat info
function for each fader/button in clear words in the display (not only numbers or cryptic codes)
LED blinking frequency proportional to the distance of the desired/stored value
Different actualizing modes: immediate with adjustable threshold, relative (to stored value), catch (stored value has to be crossed)
Sys-Ex strings with a maximum length of at least 30 bytes, the fader controlled byte can be set anywhere within the string
Definition of maximum and minimum value of the fader-generated value (including inverted characteristics)
Manipulation of incoming MIDI-events (e.g. controlling the velocity of incoming note-events with one of the faders)
Possibility of fader groups with master-fader
typical applications of the buttons: sending any MIDI event (including Sys-Ex string), different events for press and release possible (e.g. note on/note off), actual fader value can be used for the event (e.g. velocity for note on/off), sending of actual fader value, mute, demute, solo
Auto-learn mode (learning of assigned MIDI event via MIDI In)
copy/move fader/button parameters
Sampling frequency of faders is adjustable
64 presets for the assignement of all faders and buttons, when calling-up a preset any MIDI string can be sent
64 pattern for the assignment of all sequencer parameters (patterns are compatible with SCHALTWERK)
all 64 presets and 64 patterns could be send /received over SysEx
128 snapshot memories (momentary values of alle faders and buttons)
Here some features in catchwords for the "Sequencer" Mode:
analog and trigger sequencer functions (similiar but reduced compared to SCHALTWERK and MAQ16/3)
8 tracks of 16 steps (only one track can be seen and edited at a time)
controls for a track: up to 16 buttons and LEDs
setting/resetting of steps by pressing the corresponding button while the pattern is running, resulting in lively structures changeable in real time
display of the active steps and the actual step
the following parameters can be controlled in real time with the faders of the sequence-section: note number, note velocity, end step (i.e. length of the track) and many more
synchronisation internal/external (via MIDI clock or SYNC socket)
MIDI and CV/Gate outputs at the same time
General features:
2 MIDI In, 2 MIDI Out, SYNC (Roland compatible)
8 CV outputs (3.5 mm miniature jack sockets), function only in sequencer mode, range: 0...+5V, 1V/Octave characteristics
8 Gate outputs (3.5 mm miniature jack sockets), function only in sequencer mode, voltage gate 0/+5V light grey 19" case, 5 height units
24 faders (60mm), 72 buttons, 56 LEDs, 2-line LC-display, rotary encoder for data input
optically similiar to SCHALTWERK, MAQ16/3, A-100, MS-404, MCV24 and so on
