Hoi
Ik heb een paar nieuwe mod kits voor Synthi A en VCS3 gedaan, in de zelfde philosophie als mijn vorige S&H mod : sustained/transient external gate, trapezoid polarity en inverter pins.
https://www.synthforum.nl/forums/showthread.php?t=183518
De kits worden klaar om te installeren en met een met gedetailleerde installatie-instructies (engels) verkocht.
Korting op de verzendkosten voor bulk-aankoop.
Bedankt voor uw interesse.
Sustained/transient external gate push-pull pot
Transforms any external gate signal into a short trigger.
When pushed, the envelope behaves as normal.
When pulled, the "on" time depends on the knob setting only and is not related to how long you press your keyboard key, very useful for snappy envelopes.
Works with both keyboard Jones socket and jack (if installed) gate inputs
Mounted in place of the "on" pot.
A LED fills the former anti-rotation hole and shows the mod is active.
Comes with detailed installation schedule for the kit and for the optional jack gate input mod.
55€ including worldwide shipping.
Installation needs to temporaly remove the reverb tank
Trapezoid polarity push-pull pot
Controls the trapezoid output polarity.
When pushed, the trapezoid behaves as normal.
When pulled, the trapezoid polarity is inverted.
Mounted in place of the "trapezoid" pot.
A LED fills the former anti-rotation hole and shows the mod is active.
Comes with detailed installation schedule for the kit.
50€ including worldwide shipping.
Inverter pins PCB
2 pins are wired to an inverter circuit and can be used to invert the signal polarity.
Comes with detailed installation schedule for the kit and grey shielded cable for the pins.
30€ including worldwide shipping without the pins.
100€ including worldwide shipping with 2 pre-wired pins.
Installation needs to slightly enlarge 2 pin shaft holes of the pin park for the cable
Ik heb een paar nieuwe mod kits voor Synthi A en VCS3 gedaan, in de zelfde philosophie als mijn vorige S&H mod : sustained/transient external gate, trapezoid polarity en inverter pins.
https://www.synthforum.nl/forums/showthread.php?t=183518
De kits worden klaar om te installeren en met een met gedetailleerde installatie-instructies (engels) verkocht.
Korting op de verzendkosten voor bulk-aankoop.
Bedankt voor uw interesse.
Sustained/transient external gate push-pull pot
Transforms any external gate signal into a short trigger.
When pushed, the envelope behaves as normal.
When pulled, the "on" time depends on the knob setting only and is not related to how long you press your keyboard key, very useful for snappy envelopes.
Works with both keyboard Jones socket and jack (if installed) gate inputs
Mounted in place of the "on" pot.
A LED fills the former anti-rotation hole and shows the mod is active.
Comes with detailed installation schedule for the kit and for the optional jack gate input mod.
55€ including worldwide shipping.
Installation needs to temporaly remove the reverb tank
Trapezoid polarity push-pull pot
Controls the trapezoid output polarity.
When pushed, the trapezoid behaves as normal.
When pulled, the trapezoid polarity is inverted.
Mounted in place of the "trapezoid" pot.
A LED fills the former anti-rotation hole and shows the mod is active.
Comes with detailed installation schedule for the kit.
50€ including worldwide shipping.
Inverter pins PCB
2 pins are wired to an inverter circuit and can be used to invert the signal polarity.
Comes with detailed installation schedule for the kit and grey shielded cable for the pins.
30€ including worldwide shipping without the pins.
100€ including worldwide shipping with 2 pre-wired pins.
Installation needs to slightly enlarge 2 pin shaft holes of the pin park for the cable