Drie maanden geleden aangeschaft bij Dijkman. Uitgepakt, aangesloten....definitief besloten dat ik nog maar aan een van de twee passies (draaien of produceren) toekwam...! En dat was draaien.
De Tascam die ik nu dan ook aanbied is letterlijk maar 5 uur uit de doos geweest...De kop is er zogezegd af, maar dat is het dan ook wel. Registratiekaarten, software etc etc allemaal nog ongebruikt en (waar relevant) verzegeld.
Anyway.....de kenners (en die zitten hier....) weten wat een lekker apparaat die Tascam is en ik vind het wel een beetje zonde om hem nog een maand in de doos te laten staan (ik weet het, ik weet het....het is een schande)
Nu dus aangeboden een "nog veel meer dan zo goed als nieuwe" Tascam FW-1082
Hij is te bezichtigen en te halen in Amstelveen en eventueel te bezorgen (in de buurt) In verband met werk aan huis is ook overdag (en dus snel) halen en brengen mogelijk......! Mijn vraagprijs is 500 Euro (inclusief bezorgen hahaha)
Voor de zekerheid nog even op een rijtje:
------------------------------------------------------------------------------------------------------------------------------------------
Utilizing the latest FireWire technology, the Tascam FW-1082 is a complete studio solution with audio I/O, MIDI I/O and a full-featured control surface in one affordable package. Whether you’re just starting out or looking to upgrade your hardware, the FW-1082 is an ideal choice for a compact recording system.
Four microphone inputs, each with phantom power for condenser mics, record to multiple tracks for later overdubbing or mixdown. The first two inputs have analogue insert points, so you can insert a compressor to keep from distorting or add any external effect to your recording tracks. Up to eight line level signals can be recorded or mixed simultaneously – such as synthesizers or multieffects processors. An SPDIF connection allows you to connect digital sources for pristine audio quality.
The FW-1082 includes a full-featured MIDI interface with two MIDI inputs and two MIDI outputs, so you can connect several synths and controllers. The control surface of the FW-1082 features nine touch-sensitive moving faders that snap to position when you select a bank of eight faders. A full selection of transport buttons, cursor keys and a shuttle wheel allow you to quickly jump to any point of your song without touching a mouse.
The four assignable encoders provide exact control over pan, EQ* or aux sends of your workstation software mix. Separate headphone and monitor outputs and controls are also provided. It’s compatible with all of the top DAW recording applications, including the bundled Cubase LE 48-track workstation. With its audio, MIDI and control surface features, the FW-1082 is the perfect command center for your home studio.
*Control Surface compatibility for some features is subject to the DAW program’s native driver software. Check for the latest driver software updates and documentation.
Main Features
Audio interface with 10 inputs and 4 outputs
Enough ins and outs to record a band or mix a MIDI synth arrangement
24-bit/96-kHz audio resolution
Audiophile recording quality captures every detail and nuance
Four balanced XLR/TRS mic/line inputs with phantom power
Connect line sources, dynamic or studio condenser microphones
Four additional balanced TRS line inputs (one switchable to Guitar)
Eight total inputs for line sources, guitar/bass (ch. 8 switchable) or effect returns
Analogue inserts on channels 1 and 2
Insert a compressor, limiter, noise gate, EQ or effect while recording
SPDIF stereo digital input and output
Perfectly transfer digital audio to CD recorders, samplers or effects processors
Balanced TRS monitor outputs
Connect to your monitor system even over long distances
Headphone output with level control
Listen to your recording without additional monitor amplifier/speakers
Two MIDI inputs and outputs
Use up to 32 channels of multi-timbral MIDI
Assignable footswitch jack
Can be used for hands-free recording
Nine 60-mm touch-sensitive moving faders
Automate mix moves like a pro and see where level is set on any channel including the master
Eight channel strips with solo, mute and select buttons and record arm indicator
Quickly access your channels without using the mouse
Four assignable encoders
Use real controls to adjust pan, aux level and EQ parameters*
Transport controls, jog/shuttle wheel and many other surface controls*
Control your DAW application comfortably like a hardware recorder*
Emulates Mackie® HUI® and Mackie® Control™ in addition to included native mode control plug ins
Works out of the box with any professional DAW software application
Includes GigaStudio™ 3 LE software sampling instrument
64-voice streaming sampler, compatible with GigaStudio libraries, VST plug-in support and ReWire
Includes Steinberg® Cubase® LE software
48-track recording at 96kHz plus MIDI tracks, VST plug-ins, ReWire support and digital mixing with an upgrade path to Cubase SX
Minimum hardware requirements under Mac operating systems: Macintosh G4 processor
*Control Surface compatibility for some features is subject to the DAW program’s native driver software. Check for the latest driver software updates and documentation.
Specifications
Analogue inputs and outputs
MIC input 1-4 (Balanced) 3-pin XLR jack x 4 (1: GND, 2: Hot, 3: Cold)
Input impedance 2.2k Ohm
Adjustable Input range -56dBu (TRIM max) to -2 dBu (TRIM min)
Maximum gain +54dB
Phantom power Switchable +48V
LINE input 1-8 (Balanced) 6.3-mm TRS jack x 8
Input impedance 10k Ohm at LINE/MIC
500k Ohm at GUITAR (LINE Input: 8 switchable)
Adjustable input range Channels 1-4: -42dBu (TRIM max) to +12dBu (TRIM min.)
Channels 5-8: -43dBu (TRIM max) to +4dBu (TRIM min.)
Maximum gain +54dB (channels 1-4), +46dB (channels 5-
INSERT 1-2 (Unbalanced) 6.3-mm TRS jack with tip SW x 2
(T=SEND, R=RETURN, S=GND)
Impedance (Send) 100 Ohm
Nominal level (Send) -2dBu
Maximum level (Send) +14dBu
Impedance (Return) 10k Ohm
Nominal level (Return) -2dBu
Maximum level (Return) +14dBu
Analogue Monitor output 6.3-mm jack (balanced) x 2
Output impedance 100 Ohm
Nominal output level +4dBu
Maximum output level +20dBu
Phones output (Stereo) 6.3-mm stereo jack (T = L, R = R, S = GND) x 1
Max output power 52mW + 52mW (32 Ohm)
Digital inputs and outputs
Digital input (COAXIAL) 2-channel serial digital audio signal input terminal. In the case of Hi sampling, Hi-speed mode is supported.
Connector RCA jack x 1
Input impedance 75 Ohm
Format IEC60958 (SPDIF)
Audio bit length 24-bit
Digital output (Coaxial) 2-channel serial digital audio signal output terminal. In the case of Hi sampling, Hi-speed mode is supported.
Connector RCA jack x 1
Output impedance 75 Ohm
Format IEC60958 (SPDIF)
Audio bit length 24-bit
Other inputs and outputs
MIDI input 1-2 5-pin DIN connector x 2 – conforms to MIDI specifications
FireWire (IEEE.1394 digital interface) IEEE.1394 connector x 2
Format IEEE.1394
Transmit rate 400 Mbps
Foot switch for Punch In/Out of DAW application Normally-open 6.3-mm TRS jack
Overall system and audio specifications
Sampling frequency
Internal clock 44.1kHz / 48.0kHz / 88.2kHz / 96.0kHz
External clock Digital input
THD (at +4dBu) <0.005% (20 Hz - 20 kHz, LINE IN to INSERT SEND)
<0.01% (1 kHz, LINE IN to MONITOR OUTPUT)
Frequency response (@ nominal level) 20Hz - 20kHz, ±1.0dB
(normal FS, MIC/LINE IN to INSERT SEND)
20Hz - 40kHz, +0.5dB / -1.0dB
(Hi FS, MIC/LINE IN to INSERT SEND)
20Hz - 20kHz, ±1.0dB
(normal FS, LINE IN to MONITOR OUTPUT)
20Hz - 40kHz, +0.5dB / -2.0dB
(Hi FS, LINE IN to MONITOR OUTPUT)
Noise level (20Hz - 20kHz, TRIM max, 150 Ohm) <-128dBu (EIN), MIC IN to INSERT SEND
<-64dBu, LINE IN to MONITOR OUTPUT
Crosstalk (1kHz) >80dB, MONITOR OUTPUT
Power supply and other specifications
External power adapter AC input 100V AC, 50/60Hz
120V AC, 60Hz
230V AC, 50Hz
240V AC, 50Hz
Adapter output voltage 12V, 2.5A
Power consumption 22W
Applicable electromagnetic environment E4
Peak inrush current 2.6A
Dimensions (W x H x D) 486mm x 83mm x 386mm
Weight (excluding adapter) 6.5kg
Supplied accessories AC adapter (PS-1225B) and AC cable
2m (6ft) IEEE.1394 6-6 cable
CD-ROM containing driver, utility software and documentation
CD-ROM containing Cubase LE
Owner's Manual
Setup Guide
Warranty card
Design and specifications subject to change without notice.
© 2005 Tascam Division · TEAC Europe GmbH
All rights reserved.
This page last updated: 13 juli 2005 12:20:28 GMT+02:00
De Tascam die ik nu dan ook aanbied is letterlijk maar 5 uur uit de doos geweest...De kop is er zogezegd af, maar dat is het dan ook wel. Registratiekaarten, software etc etc allemaal nog ongebruikt en (waar relevant) verzegeld.
Anyway.....de kenners (en die zitten hier....) weten wat een lekker apparaat die Tascam is en ik vind het wel een beetje zonde om hem nog een maand in de doos te laten staan (ik weet het, ik weet het....het is een schande)
Nu dus aangeboden een "nog veel meer dan zo goed als nieuwe" Tascam FW-1082
Hij is te bezichtigen en te halen in Amstelveen en eventueel te bezorgen (in de buurt) In verband met werk aan huis is ook overdag (en dus snel) halen en brengen mogelijk......! Mijn vraagprijs is 500 Euro (inclusief bezorgen hahaha)
Voor de zekerheid nog even op een rijtje:
------------------------------------------------------------------------------------------------------------------------------------------
Utilizing the latest FireWire technology, the Tascam FW-1082 is a complete studio solution with audio I/O, MIDI I/O and a full-featured control surface in one affordable package. Whether you’re just starting out or looking to upgrade your hardware, the FW-1082 is an ideal choice for a compact recording system.
Four microphone inputs, each with phantom power for condenser mics, record to multiple tracks for later overdubbing or mixdown. The first two inputs have analogue insert points, so you can insert a compressor to keep from distorting or add any external effect to your recording tracks. Up to eight line level signals can be recorded or mixed simultaneously – such as synthesizers or multieffects processors. An SPDIF connection allows you to connect digital sources for pristine audio quality.
The FW-1082 includes a full-featured MIDI interface with two MIDI inputs and two MIDI outputs, so you can connect several synths and controllers. The control surface of the FW-1082 features nine touch-sensitive moving faders that snap to position when you select a bank of eight faders. A full selection of transport buttons, cursor keys and a shuttle wheel allow you to quickly jump to any point of your song without touching a mouse.
The four assignable encoders provide exact control over pan, EQ* or aux sends of your workstation software mix. Separate headphone and monitor outputs and controls are also provided. It’s compatible with all of the top DAW recording applications, including the bundled Cubase LE 48-track workstation. With its audio, MIDI and control surface features, the FW-1082 is the perfect command center for your home studio.
*Control Surface compatibility for some features is subject to the DAW program’s native driver software. Check for the latest driver software updates and documentation.
Main Features
Audio interface with 10 inputs and 4 outputs
Enough ins and outs to record a band or mix a MIDI synth arrangement
24-bit/96-kHz audio resolution
Audiophile recording quality captures every detail and nuance
Four balanced XLR/TRS mic/line inputs with phantom power
Connect line sources, dynamic or studio condenser microphones
Four additional balanced TRS line inputs (one switchable to Guitar)
Eight total inputs for line sources, guitar/bass (ch. 8 switchable) or effect returns
Analogue inserts on channels 1 and 2
Insert a compressor, limiter, noise gate, EQ or effect while recording
SPDIF stereo digital input and output
Perfectly transfer digital audio to CD recorders, samplers or effects processors
Balanced TRS monitor outputs
Connect to your monitor system even over long distances
Headphone output with level control
Listen to your recording without additional monitor amplifier/speakers
Two MIDI inputs and outputs
Use up to 32 channels of multi-timbral MIDI
Assignable footswitch jack
Can be used for hands-free recording
Nine 60-mm touch-sensitive moving faders
Automate mix moves like a pro and see where level is set on any channel including the master
Eight channel strips with solo, mute and select buttons and record arm indicator
Quickly access your channels without using the mouse
Four assignable encoders
Use real controls to adjust pan, aux level and EQ parameters*
Transport controls, jog/shuttle wheel and many other surface controls*
Control your DAW application comfortably like a hardware recorder*
Emulates Mackie® HUI® and Mackie® Control™ in addition to included native mode control plug ins
Works out of the box with any professional DAW software application
Includes GigaStudio™ 3 LE software sampling instrument
64-voice streaming sampler, compatible with GigaStudio libraries, VST plug-in support and ReWire
Includes Steinberg® Cubase® LE software
48-track recording at 96kHz plus MIDI tracks, VST plug-ins, ReWire support and digital mixing with an upgrade path to Cubase SX
Minimum hardware requirements under Mac operating systems: Macintosh G4 processor
*Control Surface compatibility for some features is subject to the DAW program’s native driver software. Check for the latest driver software updates and documentation.
Specifications
Analogue inputs and outputs
MIC input 1-4 (Balanced) 3-pin XLR jack x 4 (1: GND, 2: Hot, 3: Cold)
Input impedance 2.2k Ohm
Adjustable Input range -56dBu (TRIM max) to -2 dBu (TRIM min)
Maximum gain +54dB
Phantom power Switchable +48V
LINE input 1-8 (Balanced) 6.3-mm TRS jack x 8
Input impedance 10k Ohm at LINE/MIC
500k Ohm at GUITAR (LINE Input: 8 switchable)
Adjustable input range Channels 1-4: -42dBu (TRIM max) to +12dBu (TRIM min.)
Channels 5-8: -43dBu (TRIM max) to +4dBu (TRIM min.)
Maximum gain +54dB (channels 1-4), +46dB (channels 5-
INSERT 1-2 (Unbalanced) 6.3-mm TRS jack with tip SW x 2
(T=SEND, R=RETURN, S=GND)
Impedance (Send) 100 Ohm
Nominal level (Send) -2dBu
Maximum level (Send) +14dBu
Impedance (Return) 10k Ohm
Nominal level (Return) -2dBu
Maximum level (Return) +14dBu
Analogue Monitor output 6.3-mm jack (balanced) x 2
Output impedance 100 Ohm
Nominal output level +4dBu
Maximum output level +20dBu
Phones output (Stereo) 6.3-mm stereo jack (T = L, R = R, S = GND) x 1
Max output power 52mW + 52mW (32 Ohm)
Digital inputs and outputs
Digital input (COAXIAL) 2-channel serial digital audio signal input terminal. In the case of Hi sampling, Hi-speed mode is supported.
Connector RCA jack x 1
Input impedance 75 Ohm
Format IEC60958 (SPDIF)
Audio bit length 24-bit
Digital output (Coaxial) 2-channel serial digital audio signal output terminal. In the case of Hi sampling, Hi-speed mode is supported.
Connector RCA jack x 1
Output impedance 75 Ohm
Format IEC60958 (SPDIF)
Audio bit length 24-bit
Other inputs and outputs
MIDI input 1-2 5-pin DIN connector x 2 – conforms to MIDI specifications
FireWire (IEEE.1394 digital interface) IEEE.1394 connector x 2
Format IEEE.1394
Transmit rate 400 Mbps
Foot switch for Punch In/Out of DAW application Normally-open 6.3-mm TRS jack
Overall system and audio specifications
Sampling frequency
Internal clock 44.1kHz / 48.0kHz / 88.2kHz / 96.0kHz
External clock Digital input
THD (at +4dBu) <0.005% (20 Hz - 20 kHz, LINE IN to INSERT SEND)
<0.01% (1 kHz, LINE IN to MONITOR OUTPUT)
Frequency response (@ nominal level) 20Hz - 20kHz, ±1.0dB
(normal FS, MIC/LINE IN to INSERT SEND)
20Hz - 40kHz, +0.5dB / -1.0dB
(Hi FS, MIC/LINE IN to INSERT SEND)
20Hz - 20kHz, ±1.0dB
(normal FS, LINE IN to MONITOR OUTPUT)
20Hz - 40kHz, +0.5dB / -2.0dB
(Hi FS, LINE IN to MONITOR OUTPUT)
Noise level (20Hz - 20kHz, TRIM max, 150 Ohm) <-128dBu (EIN), MIC IN to INSERT SEND
<-64dBu, LINE IN to MONITOR OUTPUT
Crosstalk (1kHz) >80dB, MONITOR OUTPUT
Power supply and other specifications
External power adapter AC input 100V AC, 50/60Hz
120V AC, 60Hz
230V AC, 50Hz
240V AC, 50Hz
Adapter output voltage 12V, 2.5A
Power consumption 22W
Applicable electromagnetic environment E4
Peak inrush current 2.6A
Dimensions (W x H x D) 486mm x 83mm x 386mm
Weight (excluding adapter) 6.5kg
Supplied accessories AC adapter (PS-1225B) and AC cable
2m (6ft) IEEE.1394 6-6 cable
CD-ROM containing driver, utility software and documentation
CD-ROM containing Cubase LE
Owner's Manual
Setup Guide
Warranty card
Design and specifications subject to change without notice.
© 2005 Tascam Division · TEAC Europe GmbH
All rights reserved.
This page last updated: 13 juli 2005 12:20:28 GMT+02:00
