Bonnefooi
Ouwe rot
Omdat ik geen behoefte meer heb aan een dual channel preamp i.v.m. verkoop stereo setjes oktava'' gaat hij de verkoop in.
Het betreft hier de digitale uitvoering van de MPA II, naar mijn mening een zeer degelijke preamp voor het geld. Heb er altijd goede opnames mee vekregen.
De diverse opties (oa. plate voltage, var. impedantie) laten je echt het je opname shapen.
- Nieuw gekocht begin 2011
- JJ buizen upgrade
- Komt met wordclock en spdiff kabel
- Inclusief manual en doos
- Unit is echt nog in nieuwstaat, folie nog op de meters
- Geen krassen, geen rackmount sporen
- Mooie dual channel buizen preamp
- Digitale uitgang
Hier de link naar thomann: http://www.thomann.de/nl/art_pro_dmpa_ii.htm
Kost nieuw nog steeds €489,- mag weg voor €375,-, lijkt me wel een mooie prijs voor een unit in praktische nieuwstaat.
Hieronder specificaties zoals aangegeven door de fabrikant:
Variable Input Impedance For Flexible Microphone Voicing (150 Ohms To 2400 Ohms)
Selectable Plate Voltage
Large VU Meters
Backlit Function Switches
Discrete Class-A Input Microphone Preamplifier
Low Noise at Lower Gain Settings
Extremely Low Total Harmonic Distortion (THD)
Wide Frequency Response
Additional Front Mounted Instrument Input Jack
Supports Mid/Side Miking Technique
Operates at +4dbm/-10dbv Output
Selectable Stereo/Dual Operation of Output Controls
Automatic Instrument Input Selection
24-204KHz External sample rate
44.1K, 48K, 88.2K, 96K, 176.4K, 192K Internal sample rates
24/16 bit switchable dithering
Wide dynamic range A/D
Rotary Encoder for quick selection of sample rate
Separate analog and digital output level controls
Digital Level LED meters display both Average and Peak level
ADAT optical I/O
Sync to incoming ADAT data rate
Switch selectable optical output (S/PDIF or ADAT)
AES/EBU and S/PDIF outputs
Two wordclock jacks allowing loop through
Specifications
Analog Section:
Frequency Response 15Hz to 48 kHz (+0, -1dB) @ normal plate voltage
15Hz to 120 kHz (+0, -1dB) @ high plate voltage
Dynamic range: >110dB ("A" weighted)
CMRR: >90dB
THD: <0.005% (typical)
Equivalent Input Noise: -129dBu (XLR, "A" weighted)
Maximum Input Level: +19dBu (cannon)
Maximum Instrument Input: +17dBu
Input Impedance: 150-3000 Ohms adjustable (XLR)
>800K Ohms (Instrument)
Maximum Output Level: +27dBu (XLR)
Output Impedance:: <47 Ohms (XLR)
Maximum Gain: 75dB
Meter Calibration: 0 VU = +4dBu output (+4dB mode)
0 VU = -10dBV output (-10dB mode)
High Pass Filter: single pole, 10-200 Hz adjustable
Digital Section:
A/D Frequency Response:
@44.1KHz sample rate: 10Hz to 21.25KHz (+0, -1dB)
@88.2KHz sample rate: 10Hz to 42.50KHz (+0, -1dB)
@196KHz sample rate: 10Hz to 81KHz (+0, -1dB)
A/D Dynamic Range: >112dB "A" weighted (typical)
A/D THD: <0.001% @1K (typical)
A/D Input Sensitivity: +12dBu min
A/D Insert Input Impedance: >10K Ohms
Power Requirements: USA - 105 to 125 VAC / 60 Hz Export units configured for country of destination
Dimensions: (HxWxD in) 3.50 x 19.0 x 8.75
Dimensions: (HxWxD mm) 88 x 482x 222
Weight: (lb/kg) 10.5 / 4.7
Het betreft hier de digitale uitvoering van de MPA II, naar mijn mening een zeer degelijke preamp voor het geld. Heb er altijd goede opnames mee vekregen.
De diverse opties (oa. plate voltage, var. impedantie) laten je echt het je opname shapen.
- Nieuw gekocht begin 2011
- JJ buizen upgrade
- Komt met wordclock en spdiff kabel
- Inclusief manual en doos
- Unit is echt nog in nieuwstaat, folie nog op de meters
- Geen krassen, geen rackmount sporen
- Mooie dual channel buizen preamp
- Digitale uitgang
Hier de link naar thomann: http://www.thomann.de/nl/art_pro_dmpa_ii.htm
Kost nieuw nog steeds €489,- mag weg voor €375,-, lijkt me wel een mooie prijs voor een unit in praktische nieuwstaat.
Hieronder specificaties zoals aangegeven door de fabrikant:
Variable Input Impedance For Flexible Microphone Voicing (150 Ohms To 2400 Ohms)
Selectable Plate Voltage
Large VU Meters
Backlit Function Switches
Discrete Class-A Input Microphone Preamplifier
Low Noise at Lower Gain Settings
Extremely Low Total Harmonic Distortion (THD)
Wide Frequency Response
Additional Front Mounted Instrument Input Jack
Supports Mid/Side Miking Technique
Operates at +4dbm/-10dbv Output
Selectable Stereo/Dual Operation of Output Controls
Automatic Instrument Input Selection
24-204KHz External sample rate
44.1K, 48K, 88.2K, 96K, 176.4K, 192K Internal sample rates
24/16 bit switchable dithering
Wide dynamic range A/D
Rotary Encoder for quick selection of sample rate
Separate analog and digital output level controls
Digital Level LED meters display both Average and Peak level
ADAT optical I/O
Sync to incoming ADAT data rate
Switch selectable optical output (S/PDIF or ADAT)
AES/EBU and S/PDIF outputs
Two wordclock jacks allowing loop through
Specifications
Analog Section:
Frequency Response 15Hz to 48 kHz (+0, -1dB) @ normal plate voltage
15Hz to 120 kHz (+0, -1dB) @ high plate voltage
Dynamic range: >110dB ("A" weighted)
CMRR: >90dB
THD: <0.005% (typical)
Equivalent Input Noise: -129dBu (XLR, "A" weighted)
Maximum Input Level: +19dBu (cannon)
Maximum Instrument Input: +17dBu
Input Impedance: 150-3000 Ohms adjustable (XLR)
>800K Ohms (Instrument)
Maximum Output Level: +27dBu (XLR)
Output Impedance:: <47 Ohms (XLR)
Maximum Gain: 75dB
Meter Calibration: 0 VU = +4dBu output (+4dB mode)
0 VU = -10dBV output (-10dB mode)
High Pass Filter: single pole, 10-200 Hz adjustable
Digital Section:
A/D Frequency Response:
@44.1KHz sample rate: 10Hz to 21.25KHz (+0, -1dB)
@88.2KHz sample rate: 10Hz to 42.50KHz (+0, -1dB)
@196KHz sample rate: 10Hz to 81KHz (+0, -1dB)
A/D Dynamic Range: >112dB "A" weighted (typical)
A/D THD: <0.001% @1K (typical)
A/D Input Sensitivity: +12dBu min
A/D Insert Input Impedance: >10K Ohms
Power Requirements: USA - 105 to 125 VAC / 60 Hz Export units configured for country of destination
Dimensions: (HxWxD in) 3.50 x 19.0 x 8.75
Dimensions: (HxWxD mm) 88 x 482x 222
Weight: (lb/kg) 10.5 / 4.7