Machinedrum update
- Thread starter DJ_LecZ
- Start date
List of changes from Machinedrum SPS-1 OS 1.12 to 1.19
------------------------------------------------------
Updates
-------
-- Holding Function while turning an encoder relatively changes this
parameter for all 16 tracks. Indicated by the number under the
encoder being inverted.
-- Index in bars and beats added to the song window for easier
synchronisation with other sequencers, such as the Monomachine.
-- If the global-midi-base channel is turned below '1-4' it goes to
'--', eliminating track-oriented send and receive for all MIDI
channels. System common and System realtime MIDI messages (such as
MIDI timing and MIDI synchronization) are not affected.
-- New group in global-midi-map editor 'ctrl' for assigning notes to
pattern start and stop.
-- New table in global-midi-map editor 'trig' for controlling the
functionality of pattern MIDI trigging.
-- Indication of the currently selected pattern when holding one of the
bank buttons illustrated by a double lock blink.
(blink-blink ... ... blink-blink).
-- DJ-tempo: Pressing left/right arrow key temporarily decreases/increases
the tempo by up to 10%.
-- Copy/clear/paste added in kit load/save lists.
-- Mini-star added after kits that are not used by any pattern.
-- Tap tempo algorithm improved.
-- Song mutes, offset and length are temporary remembered when exiting
song mode until stop is pressed or a new pattern is selected.
-- New machines group, CTR, with machines CTR-AL and CTR-8P:
* CTR-AL
Parameter changes are duplicated as relative changes to ALL other
tracks. Trigs have no direct effect, but can be used to hold locks.
Changes are permanent to the destination parameters. The function
of CTR-AL is the same as holding function while turning, but can
be used for adding parameter locks for all tracks.
* CTR-8P
Changes 8 Parameters from any track and page controlled from the
synthesis page and selected with the effects and routing pages. Trigs
have no direct effect, but can be used to hold locks.
Please note that changes are permanent to the destination parameters
for all CTR machines.
-- Edit Accent, Swing and Slide either for all tracks or for each
separate track. Select ALL or T:XX in the edit window.
-- MIDI Program Change now changes pattern, not kit.
-- Separate selection for tempo and control in and out in the global slot.
-- The Early Boot Menu is updated to allow for upgrading from one
Machinedrum to another. Share the latest OS with your friends, no
computer needed, just a MIDI cable.
Bugfixes
--------
Song-slot remembered incorrectly. Fixed.
The famous mute-bug in song mode. If the scale setup was set to
the second part of the pattern the song mutes can't be changed.
Fixed.
Clear track undo doesn't work. Fixed.
Parameter locks error with linked machines. Fixed.
When changing speed, depth or shmix, the LFO-menu and exiting to the
routing page the parameters were not updated correctly. Fixed.
When playing short notes with the MIDI machines and using swing the
note offs could be forgotten. Fixed.
MIDI machines send too much MIDI. MW, PB, PC and CC's should only be
sent when the value actually has changed. Fixed.
The first note sent from MIDI machines when in song mode was
duplicated. Fixed.
Manual mutes of MIDI machines did not occur simultaneously with
muting of internal tracks. Fixed.
MIDI note off as 0x80 was not recognized, sorry for that. Fixed.
Inconsequent display of pattern looping in song mode. Fixed.
The sound selection LED's did not always correctly show what notes
was played. Fixed.
Pressing any of the bank buttons or trying to do a copy/paste/clear
when in play and having opened the MIDI map editor resulted in very
strange behaviour. Fixed.
Copy and paste of single notes with function held down could lead to
the Machinedrum behaving strangely. (Please note there is no need to
actually hold function to copy or paste a single note, just holding
the trig button and pressing the appropriate copy/clear/past button
will do). Fixed.
The octave nr was not displayed correctly in the global slot-midi-map
editor. Fixed.
If releasing the bank button before the trig button when selecting a
pattern in non record mode, and then selecting multiple patterns with
the same bank button pressed pattern chaining could occur when it
shouldn't. Fixed.
After pressing a pattern bank button while the one hand pattern section
counter was visible only one pattern could be selected as long as the
pattern bank button was pressed. Fixed.
When pressing stop the sent MIDI Timing Clock could be disturbed. A
device using Machindrum as master clock would fluctuate in tempo.
Fixed.
Various MIDI timing problems where resolved.
When receiving song pointer position and in song mode and on a row
with repeat and receiving a continue the song would be played back
incorrectly. Fixed.
------------------------------------------------------
Updates
-------
-- Holding Function while turning an encoder relatively changes this
parameter for all 16 tracks. Indicated by the number under the
encoder being inverted.
-- Index in bars and beats added to the song window for easier
synchronisation with other sequencers, such as the Monomachine.
-- If the global-midi-base channel is turned below '1-4' it goes to
'--', eliminating track-oriented send and receive for all MIDI
channels. System common and System realtime MIDI messages (such as
MIDI timing and MIDI synchronization) are not affected.
-- New group in global-midi-map editor 'ctrl' for assigning notes to
pattern start and stop.
-- New table in global-midi-map editor 'trig' for controlling the
functionality of pattern MIDI trigging.
-- Indication of the currently selected pattern when holding one of the
bank buttons illustrated by a double lock blink.
(blink-blink ... ... blink-blink).
-- DJ-tempo: Pressing left/right arrow key temporarily decreases/increases
the tempo by up to 10%.
-- Copy/clear/paste added in kit load/save lists.
-- Mini-star added after kits that are not used by any pattern.
-- Tap tempo algorithm improved.
-- Song mutes, offset and length are temporary remembered when exiting
song mode until stop is pressed or a new pattern is selected.
-- New machines group, CTR, with machines CTR-AL and CTR-8P:
* CTR-AL
Parameter changes are duplicated as relative changes to ALL other
tracks. Trigs have no direct effect, but can be used to hold locks.
Changes are permanent to the destination parameters. The function
of CTR-AL is the same as holding function while turning, but can
be used for adding parameter locks for all tracks.
* CTR-8P
Changes 8 Parameters from any track and page controlled from the
synthesis page and selected with the effects and routing pages. Trigs
have no direct effect, but can be used to hold locks.
Please note that changes are permanent to the destination parameters
for all CTR machines.
-- Edit Accent, Swing and Slide either for all tracks or for each
separate track. Select ALL or T:XX in the edit window.
-- MIDI Program Change now changes pattern, not kit.
-- Separate selection for tempo and control in and out in the global slot.
-- The Early Boot Menu is updated to allow for upgrading from one
Machinedrum to another. Share the latest OS with your friends, no
computer needed, just a MIDI cable.
Bugfixes
--------
Song-slot remembered incorrectly. Fixed.
The famous mute-bug in song mode. If the scale setup was set to
the second part of the pattern the song mutes can't be changed.
Fixed.
Clear track undo doesn't work. Fixed.
Parameter locks error with linked machines. Fixed.
When changing speed, depth or shmix, the LFO-menu and exiting to the
routing page the parameters were not updated correctly. Fixed.
When playing short notes with the MIDI machines and using swing the
note offs could be forgotten. Fixed.
MIDI machines send too much MIDI. MW, PB, PC and CC's should only be
sent when the value actually has changed. Fixed.
The first note sent from MIDI machines when in song mode was
duplicated. Fixed.
Manual mutes of MIDI machines did not occur simultaneously with
muting of internal tracks. Fixed.
MIDI note off as 0x80 was not recognized, sorry for that. Fixed.
Inconsequent display of pattern looping in song mode. Fixed.
The sound selection LED's did not always correctly show what notes
was played. Fixed.
Pressing any of the bank buttons or trying to do a copy/paste/clear
when in play and having opened the MIDI map editor resulted in very
strange behaviour. Fixed.
Copy and paste of single notes with function held down could lead to
the Machinedrum behaving strangely. (Please note there is no need to
actually hold function to copy or paste a single note, just holding
the trig button and pressing the appropriate copy/clear/past button
will do). Fixed.
The octave nr was not displayed correctly in the global slot-midi-map
editor. Fixed.
If releasing the bank button before the trig button when selecting a
pattern in non record mode, and then selecting multiple patterns with
the same bank button pressed pattern chaining could occur when it
shouldn't. Fixed.
After pressing a pattern bank button while the one hand pattern section
counter was visible only one pattern could be selected as long as the
pattern bank button was pressed. Fixed.
When pressing stop the sent MIDI Timing Clock could be disturbed. A
device using Machindrum as master clock would fluctuate in tempo.
Fixed.
Various MIDI timing problems where resolved.
When receiving song pointer position and in song mode and on a row
with repeat and receiving a continue the song would be played back
incorrectly. Fixed.
bij de update (te vinden op www.machinedrum.com) zit een text file waarin de procedure wordt uitgelegd.
Jongens, jongens, let wel dit is nog een Beta versie.
Je hebt er dus alle belang bij om hem asap te installeren
(als je geen livesets in het vooruitzicht hebt
)
en zoveel mogelijk bugs te rapporteren zodat ze in
de Alfa versie allemaal eruit zijn.
Ik heb zo het gevoel dat het wel eens
een van de laatste updates zou kunnen zijn...
Je hebt er dus alle belang bij om hem asap te installeren
(als je geen livesets in het vooruitzicht hebt
)en zoveel mogelijk bugs te rapporteren zodat ze in
de Alfa versie allemaal eruit zijn.
Ik heb zo het gevoel dat het wel eens
een van de laatste updates zou kunnen zijn...
nee, die laatse in het rijtje zou omega zijn (alpha, beta, gamma, [...] omega), zulu hoor in het rijtje alpha, bravo, charlie thuis. 
Maar maak je niet ongerust, in de software is het alpha, beta, final. Ik zou trouwens het supertof vinden als ze nog ooit een paar extra machines bouwen...vooral een goede 909 hat zou ik heerlijk vinden om erbij te hebben of een echte disco pieeeeeew machine.
Maar maak je niet ongerust, in de software is het alpha, beta, final. Ik zou trouwens het supertof vinden als ze nog ooit een paar extra machines bouwen...vooral een goede 909 hat zou ik heerlijk vinden om erbij te hebben of een echte disco pieeeeeew machine.
En wavetables en samples en ...oftewel: je kan de machinedrum nu zo instellen dat je zonder ook maar iets te hoeven verwisselen 8 zelf gekozen parameters van willekeurige machines kan veranderen
voorbeeld:
knopje 1 bedient een highpassfilter over de kick
knopje 2 bedient de galm over de snare
knopje 3 bedient de decay van de toms
knopje 4 bedient de delay over de hihats
etc
snappie?
voorbeeld:
knopje 1 bedient een highpassfilter over de kick
knopje 2 bedient de galm over de snare
knopje 3 bedient de decay van de toms
knopje 4 bedient de delay over de hihats
etc
snappie?
Waar ik ook op had gehoopt is de mogelijkheid de lengte van onafhankelijke tracks te bepalen. Ik heb bijvoorbeeld een Doepfer maq16 waar dit wel mogelijk is. Hierdoor kun je op zeer eenvoudige manier toch vreemde ritmes maken.
Jammer dat dit (nog?) niet mogelijk is. (of mis ik iets?)
Ricercar
Jammer dat dit (nog?) niet mogelijk is. (of mis ik iets?)
Ricercar
Vergelijkbare discussies
