• Het Marktplaats Archief kan als naslagwerk worden gebruikt. Alle advertenties die in het archief staan, zijn gesloten en dus niet meer actief. De aangeboden producten zijn niet meer te koop. Advertenties worden naar dit archief verplaatst als de eigenaar de advertentie heeft gesloten of wanneer er langer dan 30 dagen geen activiteit op een advertentie is geweest.

    Het heeft dus geen zin om de aanbieders te benaderen met vragen over een product dat niet langer te koop wordt aangeboden. Doe dit dan ook niet. Het voorkomt ergernis.

Doepfer A-191 Midi to CV / Shepard Generator

Status
Er kan niet meer gereageerd worden.
G

Guest

Guest
Hoi,

Ik verkoop/ruil mijn Doepfer A-191 Midi to CV / Shepard Generator.
Zat bij de vocoder die ik gekocht heb, maar aangezien ik al een MCV-24 heb istie overbodig.

Wil er 140 euro voor hebben of ruilen voor ander modular spul wat in een eurorack of een dot com rack past.

Module kan verstuurt worden of opgehaald in Rotterdam.

Pm me maar.

Groeten Bruce
 
**copy paste**

Module A-191 is a combination of a MIDI-CV interface and a Shepard Generator. Most of the controls, indicators and in/outputs have a double function; there is a switch which toggles between the two sets of functions.
In use as a MIDI-CV interface, 13 of the 16 control voltage outputs are dedicated to sending voltages converted from a particular MIDI controller (such as Mod Wheel, Volume, Pitch Wheel, Aftertouch, etc.). Controller messages on your chosen MIDI channel are converted into voltages in a range from 0 to 5 V. The other three sockets output an internal LFO generated in sync with MIDI clock, in three waveforms: sawtooth, triangle and rectangle.

In use as a so-called Shepard Generator, the sockets output eight different phases each of a triangle and sawtooth wave. The Shepard Generator creates in combination with other modules (VCO's, VCF's, VCP's, VCA's, Mixers) psycho-acoustic so-called Barberpole effects like never ending rising (or falling) phasings (with VCPs), filterings (with VCF's) or tones (with VCOs). To create the Barberpole effect you need the required additional modules in your system. For a good Barberpole effect we recommend a minimum of 4 VCP's (or VCF's or VCO's) and 4 VCA's (linear types A-130 or A-132). With 8 modules instead of 4 the sound becomes more smooth and tight.

All A-191 settings can be saved into non-volatile memory.

a191.gif
 
Status
Er kan niet meer gereageerd worden.
Back
Top