Eventide H9000R

Prijs
3950 Euro
Conditie
Zo goed als nieuw
Levering
Afhalen of verzenden
Standplaats
Eindhoven

Roonan

Lang lid
Lid sinds
15 oktober 2002
Berichten
2.262
Locatie
BH
15627-2_full.jpg



In nieuwstaat. Werkt geweldig goed met de emote software. Kan ook volledig integreren met elke DAW.

Productinformatie Eventide H9000R​

De vlaggenschip effectprocessor van Eventide is de Eventide H9000R. Deze zet de ononderbroken traditie voort van toonaangevende signaalverwerking voor de pro audio community. De H9000 is het hoogtepunt van bijna vijftig jaar R&D en bevat 1600 unieke algoritmes, van emulaties van geliefde klassiekers tot de nieuwste en beste effecten van Eventide. Met het overvloed aan effecten heb je genoeg voor vele jaren exploratie en inspiratie.
  • Physical Connections
    • Stereo I/O via XLR
    • 8 Channel I/O via DB25 (Tascam standard)
  • Audio Specs
    • SNR (A Weighted):
      44.1 kHz: >114dB
      48 kHz: >114dB
      96 kHz: >114dB
    • THD:
      44.1 kHz: <0.002%
      48 kHz: <0.002%
      96 kHz: <0.002%
    • The H9000’s XLR analog audio output jacks are male.
      Pin #1 is ground.
      Pin #2 is +phase (hot).
      Pin #3 is -phase.
  • Sample Rate:6 kHz, 88.2 kHz, 48 kHz, 44.1 kHz
  • Digital Inputs/Outputs
    • 16 Channels of USB audio. 44.1 kHz – 96 kHz.
    • USB can be used in conjunction with any other Digital I/O.
    • AES DB-25: 8 channels of AES 24-bit at 44.1 kHz – 96 kHz. Tascam standard.
    • AES XLR: 2 channels of AES at 44.1 kHz – 96 kHz
    • S/PDIF RCA: 2 channels at 44.1 kHz – 96 kHz
    • S/PDIF Optical: 2 channels (Only 44.1 kHZ and 48 kHz)
    • Optical (Toslink): 8 channels of ADAT (Only 44.1 kHZ and 48 kHz)
  • Expansion Slots: 3
  • Dante Support: Yes
  • MADI Support: Yes
  • Pro Tools HD Support: Yes
  • Remote Control Inputs:
    • Up to four foot pedals, or four 5V control voltage sources, or six foot switches, or combination.
    • 2 TRS 1/4″ inputs.
    • The sleeve is ground reference, the ring is +5 volts (source), and the tip is an analog signal from 0 to 5 volts. Connect either foot switches, foot pedals, or control voltage sources.
  • Remote Control Outputs
    • 2 isolated relay closures, rated at 30Vdc 1A. Relay #1 is connected between ring and sleeve, while Relay # 2 is connected between ring and tip. These connections are electrically isolated from the H9000.
  • MIDI Connections
    • 5 pin DIN input, output, and thru
    • USB A and USB B
  • Size: 8.9h x 48.3w x 31.7d
  • Weight: 6.4kg net
 
Back
Top