Arjen19691
Knopjes Knopjes Knopjes
DBX 150 Type 1 Noise Reduction System / ideaal voor bij de bandrecorder maar kan ook gewoon als noise reducer ingezet worden
Dynamic Range: 110dB (peak signal to 'A' weighted noise)
Input Impedance: 100k Ohms (requires source impedance less than 10k Ohms)
Nominal Input Level: -10dBV
Maximum Input Level: +16dBV
Output Impedance: 100 Ohms (requires 5k Ohm load or greater - not suitable for operation into 600 Ohm load)
Maximum Output Level: +16dBV
Frequency Response: 30Hz - 20kHz +/- 0.5dB (typical encode/decode tracking)
Slew Rate: above 10V/microsecond
Effective Noise Reduction: 30dB + 10dB of headroom
Equivalent Input Noise: -85dBV (unweighted, 20kHz bandwidth, ref 1V)
Distortion: below 0.5% THD 30Hz - 100Hz
below 0.1% THD 100Hz - 20kHz (encode/decode)
Dynamic Range: 110dB (peak signal to 'A' weighted noise)
Input Impedance: 100k Ohms (requires source impedance less than 10k Ohms)
Nominal Input Level: -10dBV
Maximum Input Level: +16dBV
Output Impedance: 100 Ohms (requires 5k Ohm load or greater - not suitable for operation into 600 Ohm load)
Maximum Output Level: +16dBV
Frequency Response: 30Hz - 20kHz +/- 0.5dB (typical encode/decode tracking)
Slew Rate: above 10V/microsecond
Effective Noise Reduction: 30dB + 10dB of headroom
Equivalent Input Noise: -85dBV (unweighted, 20kHz bandwidth, ref 1V)
Distortion: below 0.5% THD 30Hz - 100Hz
below 0.1% THD 100Hz - 20kHz (encode/decode)