Klein + Hummel O800 subwoofer in zeer goede staat.
De O800 is een subwoofer met veel vermogen en zeer lage vervorming. Hij geeft de bas daardoor moeiteloos en gedetailleerd weer. Het is een hoge kwaliteits subwoofer met interne crossover die ik nu voor een nette prijs van de hand wil doen.
Technical Data
Acoustical
-3 dB free field frequency response
27 Hz - 100 Hz, ± 3 dB
Pass band free field frequency response
30 Hz - 90 kHz, ± 2 dB
Self generated noise level at 10 cm < 20 dB(A)
THD < 0,5 % at 1 m distance from 95 dB SPL (> 30 Hz)
Max. SPL in half space at 3% THD in 1m 111.8 db SPL
Max. SPL averaged between 40 Hz and 90 Hz
Electrical
Woofer amplifier, cont. output power
(THD < 0.1%) 120 W
Woofer amplifier, peak output power 185 W
Controller design Analog, active
Crossover - Frequency 90 Hz
Crossover - Slope 24 dB/oct
Equalization - Low cut 30; 40; 50; 60 Hz
Phase adjustment delay 0 - 180°, cont. variable
Protection circuitry Limiter
Infrasonic filter: frequency/slope 25 Hz; 12 dB/oct
Input, analog
Impedance, electrically balanced 3 x XLR, 20 k
Input sensitivity -6 dBu
Max. input level
+17 dBu (5.5 Vrms) / per channel
Gain Control 0 ... -18 dB
CMRR > 50 dB @ 15 kHz
Output, analog 3 x XLR for monitor
Displays, indicators - power on LED "green" (power switch)
Mains 230 V, 120 V, 100 V AC
Power consumption - idle 15 W
Power consumption - full output AC; DC 200 W
Mechanical
Cabinet surface Painted
Color standard
Anthracite (RAL 7021), silver (RAL 9006)
Baffle cover
Fixed metal grille
Drivers Magnetically shielded
Woofer 265 mm (10")
Height x width x depth 360 x 320 x 510 mm (14.2" x 12.6" x 20.1")
Net volume internal 32.3 liters
Weight 25 kg (55.1 lbs)
Accessories FO 800
De O800 is een subwoofer met veel vermogen en zeer lage vervorming. Hij geeft de bas daardoor moeiteloos en gedetailleerd weer. Het is een hoge kwaliteits subwoofer met interne crossover die ik nu voor een nette prijs van de hand wil doen.
Technical Data
Acoustical
-3 dB free field frequency response
27 Hz - 100 Hz, ± 3 dB
Pass band free field frequency response
30 Hz - 90 kHz, ± 2 dB
Self generated noise level at 10 cm < 20 dB(A)
THD < 0,5 % at 1 m distance from 95 dB SPL (> 30 Hz)
Max. SPL in half space at 3% THD in 1m 111.8 db SPL
Max. SPL averaged between 40 Hz and 90 Hz
Electrical
Woofer amplifier, cont. output power
(THD < 0.1%) 120 W
Woofer amplifier, peak output power 185 W
Controller design Analog, active
Crossover - Frequency 90 Hz
Crossover - Slope 24 dB/oct
Equalization - Low cut 30; 40; 50; 60 Hz
Phase adjustment delay 0 - 180°, cont. variable
Protection circuitry Limiter
Infrasonic filter: frequency/slope 25 Hz; 12 dB/oct
Input, analog
Impedance, electrically balanced 3 x XLR, 20 k
Input sensitivity -6 dBu
Max. input level
+17 dBu (5.5 Vrms) / per channel
Gain Control 0 ... -18 dB
CMRR > 50 dB @ 15 kHz
Output, analog 3 x XLR for monitor
Displays, indicators - power on LED "green" (power switch)
Mains 230 V, 120 V, 100 V AC
Power consumption - idle 15 W
Power consumption - full output AC; DC 200 W
Mechanical
Cabinet surface Painted
Color standard
Anthracite (RAL 7021), silver (RAL 9006)
Baffle cover
Fixed metal grille
Drivers Magnetically shielded
Woofer 265 mm (10")
Height x width x depth 360 x 320 x 510 mm (14.2" x 12.6" x 20.1")
Net volume internal 32.3 liters
Weight 25 kg (55.1 lbs)
Accessories FO 800
