BugBrand PEQ V2 (2014) Parametric Equaliser
Zeer zeldzame (erg gelimiteerde oplage) Parametric Equaliser van BugBrand. In mei 2014 gekocht, nauwelijks gebruikt en verkeert dus in nieuw staat. Komt inclusief originele doos, adapter en toebehoren. Te koop wegens een inkrimping van mijn hobby. Nieuwprijs 313 Euro.
Prijs: 230 Euro. Ruilmogelijkheden: ik zoek nog een Clavia Nord Lead 3 / Nord Rack 3, natuurlijk met bijbetaling van mijn kant.
Info:
Updated I/O circuitry
including Impedance Balanced Output
- Bypass is now a Toggle Switch
- fine tunings to extend Frequency and Q ranges
The PEQ (Parametric Equaliser) combines 3 fully Parametric EQ sections with Low
and High Cut filtering and provides, in a compact yet ergonomic form, a
versatile tool for corrective or creative equalisation.
The three Parametric
sections are identical other than being tuned to different (and overlapping)
frequency ranges and are based on State-Variable filter topographies. Each
section offers cut or boost of 15dB over a variable frequency range, with
bandwidth variable between approximately 1/3 and 3 Octaves for gentle or
pronounced effects.
Frequency Ranges: Low 20Hz to 340Hz - Mid 80Hz to 2.4kHz - High 600Hz to 16kHz
Low and High Cut Butterworth Filters bookend the Parametric sections (see block
diagram) and give 12dB/Octave response.
Frequency Ranges: Low Cut 20Hz to 1.4kHz - High Cut 400 to 20kHz
The PEQ is designed to work with line level signals covering the full audio
spectrum and is ideal for use as a series or insert effect - the Input is on
unbalanced 1/4" jack, while the Output is on Impedance Balanced 1/4".
An input buffer precedes the bypass toggle switch (with Active LED indicator).
Unity gain is achieved through the equaliser sections with Low Cut fully
counter-clockwise, High Cut fully clockwise and the three Cut/Boost dials set
to their middle positions.
The panel design aims for spacious layout and implements oversized knobs for
fine frequency adjustments. The worldwide PSU powers an internal bipolar 15V
DC-DC converter for wide signal headroom. A Peak indicator monitors the signal
at each stage of the PEQ to detect overload.
Technical Specifications:
Input - Mono (unbalanced) 1/4" Jack Output - Mono (Impedance Balanced)
1/4"
Power - 12V DC 500mA supply, centre-positive, 2.1mm connector.
(worldwide 90-240VAC wall-wart provided with interchangeable mains plug
adaptors)
The PEQ is enclosed in a custom aluminium case (based on the Modular line) with
PCB material front and side panels.ÂDimensions approx 5.25" x
5" x 3.5"
Zeer zeldzame (erg gelimiteerde oplage) Parametric Equaliser van BugBrand. In mei 2014 gekocht, nauwelijks gebruikt en verkeert dus in nieuw staat. Komt inclusief originele doos, adapter en toebehoren. Te koop wegens een inkrimping van mijn hobby. Nieuwprijs 313 Euro.
Prijs: 230 Euro. Ruilmogelijkheden: ik zoek nog een Clavia Nord Lead 3 / Nord Rack 3, natuurlijk met bijbetaling van mijn kant.
Info:
Updated I/O circuitry
including Impedance Balanced Output
- Bypass is now a Toggle Switch
- fine tunings to extend Frequency and Q ranges
The PEQ (Parametric Equaliser) combines 3 fully Parametric EQ sections with Low
and High Cut filtering and provides, in a compact yet ergonomic form, a
versatile tool for corrective or creative equalisation.
The three Parametric
sections are identical other than being tuned to different (and overlapping)
frequency ranges and are based on State-Variable filter topographies. Each
section offers cut or boost of 15dB over a variable frequency range, with
bandwidth variable between approximately 1/3 and 3 Octaves for gentle or
pronounced effects.
Frequency Ranges: Low 20Hz to 340Hz - Mid 80Hz to 2.4kHz - High 600Hz to 16kHz
Low and High Cut Butterworth Filters bookend the Parametric sections (see block
diagram) and give 12dB/Octave response.
Frequency Ranges: Low Cut 20Hz to 1.4kHz - High Cut 400 to 20kHz
The PEQ is designed to work with line level signals covering the full audio
spectrum and is ideal for use as a series or insert effect - the Input is on
unbalanced 1/4" jack, while the Output is on Impedance Balanced 1/4".
An input buffer precedes the bypass toggle switch (with Active LED indicator).
Unity gain is achieved through the equaliser sections with Low Cut fully
counter-clockwise, High Cut fully clockwise and the three Cut/Boost dials set
to their middle positions.
The panel design aims for spacious layout and implements oversized knobs for
fine frequency adjustments. The worldwide PSU powers an internal bipolar 15V
DC-DC converter for wide signal headroom. A Peak indicator monitors the signal
at each stage of the PEQ to detect overload.
Technical Specifications:
Input - Mono (unbalanced) 1/4" Jack Output - Mono (Impedance Balanced)
1/4"
Power - 12V DC 500mA supply, centre-positive, 2.1mm connector.
(worldwide 90-240VAC wall-wart provided with interchangeable mains plug
adaptors)
The PEQ is enclosed in a custom aluminium case (based on the Modular line) with
PCB material front and side panels.ÂDimensions approx 5.25" x
5" x 3.5"
