Deze discussie is gesloten.
X
X

E-MU 1820m PCI geluidskaart - 24bit/192KHz - 18 in/20 out - midi in/out

Collapse
  • Filter
  • Tijd
  • Tonen
Clear All
nieuwe berichten

    E-MU 1820m PCI geluidskaart - 24bit/192KHz - 18 in/20 out - midi in/out




    Prijs:299,-

    Prima geluidskaart met goeie ad-conv en pre-amps. In goede staat, altijd erg goed voor gezorgd en veel plezier van gehad. Gaat de deur uit wegens uitbreiding.

    Compleet met PCI-kaart, Sync-daughter-kaart, kabel, Audiodock en software. Helaas geen doos.

    Mail voor reacties of eventuele onderhandelingen naar: marczeebregts@home.nl

    "Excuses voor de Engelstalige specs"
    :

    The E-MU® 1820M is the flagship of E-MU's line of Digital Audio Systems, delivering everything you need to produce audio on a PC with professional results- 24-bit/192kHz converters (the same A/D converters used in Digidesign®'s ProTools® HD 192 I/O interface), hardware-accelerated effects and mixing, comprehensive sync options and seamless compatibility with your favorite PC audio/sequencer software. No other audio solution available offers the performance, flexibility and value of the E-MU 1820M.

    Studio pakkage contains:

    - E-MU 1010 PCI Card
    - E-MU AudioDock M 1820M.
    - EDI (E-MU Digital Interface) cable (3 meters)


    The E-MU 1820M features:
    Mastering grade 24-bit/192kHz converters - the same A/D converters used in Digidesign's flagship ProTools HD 192 I/O Interface delivering an amazing 120dB signal-to-noise ratio
    Hardware-accelerated effects - over 600 standalone and E-MU Power FX VST plug-in effects with no CPU overhead
    PatchMix™ DSP zero-latency hardware mixing and monitoring - with super-flexible patchbay - no external mixer needed
    Comprehensive analog and digital I/O plus MIDI and sync - 18 inputs and 20 outputs, two sets of MIDI I/O, Word Clock, SMPTE and MTC Sync, plus FireWire port
    Two TFPro™ studio-grade preamps with Mic/Line inputs via Neutrik connectors, 48V phantom power and 40dB of gain - plug microphones, guitars and keyboards straight into your system
    Compatibility with most popular audio/sequencer applications - ultra-low latency 24-bit/192kHz ASIO 2.0 and Stereo WDM drivers
    Technical Specifications

    General
    Sample Rates: 44.1, 48, 96, 192kHz from internal crystal or externally supplied clock (no sample rate conversion)
    Bit Depths: 24-bit I/O, 32-bit processing
    PCI Specification:
    - PCI 2.2 Compliant
    - Form Factor: Universal Keyed, Short PCI Card
    - 3.3V I/O, 5V Tolerant
    - PCI Bus-Mastering DMA subsystem reduces CPU usage
    E-MU® E-DSP™ 32-bit DSP with 67-bit accumulator (double precision w/ 3 headroom bits)
    Hardware-accelerated, 32 channel mixing, and multi-effects processing
    Zero-latency direct hardware monitoring w/effects
    ASIO 2.0, Stereo WDM/MME/DirectSound Drivers
    EDI (E-MU Digital Interface) proprietary 64 channel audio link over CAT-5 cable
    Anti-Pop speaker protection minimizes noise during power on/off
    Ultra-low jitter clock subsystem: < 1ns in PLL mode (44.1kHz, Opt. S/PDIF Sync)
    Analog Line Inputs
    Type: servo-balanced, DC-coupled, low-noise input circuitry
    A/D converter: AK5394A
    Level (software selectable):
    - Professional: +4dBu nominal, 20dBu max (balanced)
    - Consumer: -10dBV nominal, 6dBV max (unbalanced)
    Frequency Response (20Hz-20kHz): +/- 0.05dB
    Dynamic Range (1kHz, A-weighted): 120dB
    Signal-to-Noise Ratio (A-weighted): 120dB
    THD+N (1kHz at -1dBFS): -110dB (.0003%)
    Stereo Crosstalk (1kHz at -1dBFS): < -115dB
    Analog Line Outputs
    Type: balanced, low noise, 3-pole low-pass differential filter
    D/A converter: CS4398
    Level (software selectable):
    - Professional: +4dBu nominal, 20dBu max (balanced)
    - Consumer: -10dBV nominal, 6dBV max (unbalanced)
    Frequency Response (20Hz - 20kHz): 0.0/-0.35dB
    Dynamic Range (1kHz, A-weighted): 120dB
    Signal-to-Noise Ratio (A-weighted): 120dB
    THD+N (1kHz at -1dBFS): -105dB (.0006%)
    Stereo Crosstalk (1kHz at -1dBFS): < -115dB
    Combo Microphone Preamplifier/Line Inputs (2)
    Type: TFPro™ combination microphone preamp and line input
    Frequency Response (20Hz - 20kHz): +0.8/-0.1dB
    Dynamic Range (A-weighted, 1kHz min gain): 100dB
    Signal-to-Noise Ratio (A-weighted, min gain): 100dB
    THD+N (1kHz at -1dBFS, min gain): -94dB (.002%)
    Stereo Crosstalk (1kHz min gain, -1dBFS): < -115dB
    Line Input:
    - Input Impedance: 10Kohm
    - Max Level: +17dBV (19.2dBu)
    - Gain Range -12 to +28dB
    Microphone Preamplifier:
    - Input Impedance: 330ohms
    - Max Level: -12dBV (-9.8dBu)
    - Gain Range: +10 to +50dB
    - Phantom Power: 48V
    Headphone Amplifier (stereo)
    Type: linear power amplifier
    D/A converter: CS4398
    Gain Range: 85dB
    Maximum Output Power: 50mW
    Output impedance: 22ohms
    Frequency Response (20Hz-20kHz): +0.0/-0.35dB
    Dynamic Range (A-weighted): 117dB
    Signal-to-Noise Ratio (A-weighted): 117dB
    THD+N (1kHz, max gain)
    - 33ohm load: -70dB (0.032%)
    - 600ohm load: -85dB (0.006%)
    Stereo Crosstalk (1kHz at -1dBFS, 600ohm load): < -100dB
    Phono Input (stereo)
    Type: RIAA equalized phono input
    Maximum level:
    - Professional: 80mV RMS
    - Consumer: 20mV RMS
    Input impedance: 47Kohm
    Frequency Response (50Hz - 20kHz): +/-0.5dB
    Dynamic Range (A-weighted): 91dB
    Signal-to-Noise Ratio (10mV RMS unbal input, A-weighted): 91dB
    THD+N (1kHz, 10mV RMS unbal input): -76dB (.015%)
    Stereo Crosstalk (1kHz at -1dBFS): < -80dB
    Digital I/O
    S/PDIF:
    - 2 in/2 out coaxial (transformer coupled)
    - 2 in/4 out optical (software switched with ADAT)
    - AES/EBU or S/PDIF format (software selectable)
    ADAT:
    - 8 channels, 24-bit @ 44.1/48kHz
    - 4 channels, 24-bit @ 96kHz (S-MUX compatible)
    - 2 channels, 24-bit @ 192kHz
    MIDI
    - 2 in, 2 out
    Firewire
    - 400 Mbps 1394a port (6-pin)
    - Compatible with DV cameras, storage peripherals, etc.
    Synchronization
    Internal crystal sync at 44.1, 48, 96, 192kHz
    - ADAT (44.1 - 192kHz)
    - S/PDIF (opt. or coax 44.1 - 96kHz)
    - Word Clock (44.1 - 192kHz) (75ohm termination, switchable via software)
    SMPTE/LTC/MTC
    - 24, 25, 30 drop-frame, 30 non-drop
    - SMPTE to MTC, MTC to SMPTE Conversion
    - SMPTE Striping
    - Flywheel/Jam/Regenerate

    #2
    Verkocht!

    Comment

    Working...
    X