levka
als je goedkoop aan een eurorack systeemkast kan komen (zonder bodem & achterwand ect) heb je alleen nog een +/- 12 V voeding nodig. Doepfer verkoopt sinds kort ook losse DIY voedingen & busboards
toevallig prijsje van de voedig en connectors ?
ahh kijk zelf wel ff ...
help sly al filterend de zomer door ...stuuds hebben t al zoo moeilijk
found
http://www.doepfer.de/home_e.htm
zelfs op de HOME page stimulans bouw je eigen case ! goed idee van herr DIETERR
je kan prima een eigen "square wooden case " timmeren [opa/papa kenneis latendoen ]
of je moet t eg inje rack willen hebben ...vint ik niet eg altyd makkelijk
een blok op tafel is makkelijk & beter reachbaar ,...afhankelijk wat voor rack je hebt !
[ik heb een propvol rack met wielen ,..noudenkmaar niet dat er nog mee te ryden val nadat alles aangesloet in ,....!]
Now available: A-100 Do-it-yourself-Kit 1 (A-100 DIY-Kit #1)
power supply with external transformer (AC output)
because of safety reasons, no dangerous voltages accessible
max. current: 1200mA (same as PSU2, but external transformer instead of ring core transformer)
2 bus boards
four 84 HP mounting rails with threaded inserts for module mounting (sufficient for 2x3U, not shown in the picture)
cable for connections between power supply and bus boards
sketches with measures (for drilling the holes at the right positions for PSU and bus board mounting)
building suggestion for wooden case (sketch + list of all required wooden case parts)
Price: Euro 120.00 (complete kit with transformer), Euro 100.00 (complete kit without transformer)
power supply only (with transformer): Euro 60.00
power supply only (without transformer): Euro 40.00
transformer only: Euro 20.00
attention: from Doepfer (Germany) only 230V transformers with European mains plug type are available (external transformer with 15V/2.5A AC required), please ask the Doepfer representative in your country if they have a transformer available that is suitable for the mains voltage and mains plug in your country
even smaller current output is possible; the current output of the power supply is half the current of the external transformer as the currents for both voltages +/-12V are required (if e.g. the transformer outputs max. 1000mA the max. power supply current is 500mA)
the technical documents are available as pdf file
je hebt die conectrs nodig ,..volgens mij kan de travo nog goed kopert
maargoed t scheelt al asje bv een case koopt kant en klaar 300+ eu ?? gekkk