hej manne, ---- > pleh pleh !
ik heb een mailtje trug gekregen van scott 'mister nice' paia
echt heel vriendelijke kerel ::: maar snap het nie zo goe,
kan ik nu beide modules voeden via 4 batterijen ofwa ???????????????????????????????
/// ik vermoed van wel
////
- - --- -- - --- - - --- --- --- - - - -- - - - - - - - - - - - -- -- - - - - - - - -- - - - --- --- - -- - - - - -------- - - - -- - - - --- - -- -- - -- - - - -
- - -- - -- - -- - - --- --- --- - - - -- - - - - - - - - - - - -- -- - - - - - - - -- - -- - - --- --- --- - - - -- - - - - - - - - - - - -- -- - - - - - - - -- - -
Hello dzjap.
These modules were to be connected to power supply modules (2720-7, 4770 two needed (one dual 9v, the other 18v), or 4771).
The power supply connection points on the rear of the modules are:
---------------
2720-3B
GND (0vdc)
+18v dc
---------------
4730
-9vdc
GND (0vdc)
+9vdc
----------------
Here is the way four 9v battery connectors with red and black wires (and designated A, B, C, and D) are wired to connect for these voltage requirements:
---------------
Join the red wire from snap A to the black of snap B and insulate this connection. Connect the black of A to GND and connect the red of B to ++ or positive 18v dc.
---------------
Join the red wire from snap C to the black of snap D and Connect these two wires to GND. Connect the black wire from snap C to -V or negative 9v dc and the red wire from snap D to +V or positive 9v dc.
---------------
If you can get your hands on a 2720-7 or 4771 power supply module, terminals are available for +and-9 v supplies and an 18v supply. The 4770 modules are configured for +and-9, or, 18v supplies and two of these would be needed to power both filter modules.
Thank you.
Sincerely, Scott Lee
- - --- -- - --- - - --- --- --- - - - -- - - - - - - - - - - - -- -- - - - - - - - -- - - - --- --- - -- - - - - -------- - - - -- - - - --- - -- -- - -- - - - -
- - -- - -- - -- - - --- --- --- - - - -- - - - - - - - - - - - -- -- - - - - - - - -- - -- - - --- --- --- - - - -- - - - - - - - - - - - -- -- - - - - - - - -- - -
ondertussen ook mailtje truggehad van ebay-kerel
whata fLuck !
hij vraagt 200 dollar vr 2 voedingen & 50 dollar vr aansluitingen
ik zou zeggen ... afzuiper
cool got your email i can sell you both for 200.00
plus shipping sending out both will cut down on shipping
allso i have a bunch of paia conecters that i would let go for around 50.00 let me know and i can put up a buy it now
----> is misschien niet zo veel ? heb er geen benul van ... 250 dollar voor 2 voedingen en connectors
mr kdacht dat ik nen all in had gekocht ... & daarmee zou het fantastisch zijn, mocht ik beiden kunnen
voeden me 4 batterijen /// ook wel ni goeikoop ///
----> heb vorige week even de kans gehad om te babbelen met de formant goochelaar
wiens mini setje ik nr alle waarschijnlijkheid zal kunnen overkopen ... maar ook daar zat noch voeding
noch conectors bij ... hij claimde dat ik dit makkelijk bij de lokale electro boer zou kunnen aanschaffen ...
daarmee vraag ik jullie nu
is er iemand die misschien op redelijk goeikope manier, deze paias
zou kunne late marcheren op stroom ... of weet hoe ik dit zou kunnen doen ...
thanx bij voorbaat !
japinsky