Nieuwe TL Audio Ivory Series

TL Audio brengt een nieuwe Ivory Series op de markt: Ivory Series II

Dit zijn buizen Perams, compressors ed.

In deze serie zijn te verkrijgen:

5001 Quad Valve Preamp ( € 915 )
5013 Dual valve equaliser ( € 915 )
5021 Dual Valve Comprssor ( € 915 )
5050 Mono Valve Preamp & Compressor ( € 570 )
5051 Mono Valve Processor ( € 915 )

Als voorbeeld heb ik de 5021 compressor genomen.

ff wat specs:

Elk kanaal heeft een variable: Input Gain, Threshold, Ratio, Gain Make-Up and Output Gain
Vier attack times: from 'Fast' (0.5mS) to 'Slow' (40mS)
Vier release times: from 'Fast' (40mS) to 'Slow' (4S)
Gebalanceerde XLR line inputs/outputs.
Sidechain insert points
En een optionele 24 bit stereo digital output.

5021lg.jpg


Meer info: TL Audio of de importeur: Tm Audio

( de prijzen zijn brutoadvies prijzen, incl BTW)
 
Laatst gewijzigd:
Een buizencompressor met digitale uitgang. Ja hoor, het moet niet gekker worden!

Maar ik had ze al in de winkel gespot en ze zien er best wel 'geil' uit hoor. ;)
 
Zoals ik in 'n ander draadje al zei is het groote voordeel van deze nieuwe range, dat de 'oude' range nu voor bodemprijzen de deur uit gaat. Volgens mij kostte de 5021 eerst tegen de 2000 guldens, nu gaan ze in engeland voor 299 pond weg. Zul je zien dat dat in Nederland dan weer net niet gebeurt....
 
weet iemand waar ze deze verkopen en waar ik ze kan beluisteren?
8P
 
En niet te vergeten de 5052

MAIN FEATURES

Valve preamp stage with mic, line and instrument connections
Valve compressor section with variable control of all parameters and both
hard/soft knee modes
Four band valve EQ section with swept LF/HF bands and parametric mids
Optical output limiter for transparent brick wall limiting
VU metering of input level, output level and gain reduction
Full stereo linking of compressor, EQ and limiter sections
A wealth of analogue input, output and insert connections
24 bit digital interfacing via the optional DO-2 digital output card

SPECIFICATIONS

Preamp Input Gain:
+16 to +60dB (mic input), -20 to +20dB (line input)
Compressor
Threshold: +10 to -20dB
Ratio: 1:1.5 to 1:30
Attack: 0.5mS to 50mS
Release: 40mS to 4S
Gain Make Up: 0 to +20dB
Equaliser
LF band: +/-15dB from 30Hz to 1kHz, shelving or peaking modes
LM band: +/- 15dB from 50Hz to 3kHz, fully parametric
(Q variable between 0.5 and 5)
HM band: +/- 15dB from 1kHz to 12kHz, fully parametric
(Q variable between 0.5 and 5)
HF band: +/- 15dB from 3kHz to 20kHz, shelving or peaking modes
Limiter:
Threshold variable: 0 to +20dB
Master Section::
Output Gain: to +15dB
PSU:
Internally adjustable for 115/230V operation
Typical consumption: 30VA
Weights & Dimensions
Dimensions: 483 x 250 x 132mm (3U 19” rack mounting)
Shipping Weight: 9kg
(The above specifications are subject to change without notice)
 

Attachments

  • 5052lg.jpg
    5052lg.jpg
    30,2 KB · Bekeken: 135
Origineel geplaatst door Modular Marty
En niet te vergeten de 5052

MAIN FEATURES

Valve preamp stage with mic, line and instrument connections
Valve compressor section with variable control of all parameters and both
hard/soft knee modes
Four band valve EQ section with swept LF/HF bands and parametric mids
Optical output limiter for transparent brick wall limiting
VU metering of input level, output level and gain reduction
Full stereo linking of compressor, EQ and limiter sections
A wealth of analogue input, output and insert connections
24 bit digital interfacing via the optional DO-2 digital output card

SPECIFICATIONS

Preamp Input Gain:
+16 to +60dB (mic input), -20 to +20dB (line input)
Compressor
Threshold: +10 to -20dB
Ratio: 1:1.5 to 1:30
Attack: 0.5mS to 50mS
Release: 40mS to 4S
Gain Make Up: 0 to +20dB
Equaliser
LF band: +/-15dB from 30Hz to 1kHz, shelving or peaking modes
LM band: +/- 15dB from 50Hz to 3kHz, fully parametric
(Q variable between 0.5 and 5)
HM band: +/- 15dB from 1kHz to 12kHz, fully parametric
(Q variable between 0.5 and 5)
HF band: +/- 15dB from 3kHz to 20kHz, shelving or peaking modes
Limiter:
Threshold variable: 0 to +20dB
Master Section::
Output Gain: to +15dB
PSU:
Internally adjustable for 115/230V operation
Typical consumption: 30VA
Weights & Dimensions
Dimensions: 483 x 250 x 132mm (3U 19” rack mounting)
Shipping Weight: 9kg
(The above specifications are subject to change without notice)

o wat geil! knopjes!
 
heeft er hier iemand ook ervaring met 100% buizen-bakken (van bv reussenzehn, groovetubes(?)) ipv deze 'hybride' oplossingen? is er een duidelijk verschil in klank waar te nemen?

Olaf
 
Back
Top