marczeebregts
Nieuwkomer
Prijs:299,-
Prima geluidskaart met goeie ad-conv en pre-amps. In goede staat, altijd erg goed voor gezorgd en veel plezier van gehad. Gaat de deur uit wegens uitbreiding.
Compleet met PCI-kaart, Sync-daughter-kaart, kabel, Audiodock en software. Helaas geen doos.
Mail voor reacties of eventuele onderhandelingen naar: marczeebregts@home.nl
"Excuses voor de Engelstalige specs":
The E-MU® 1820M is the flagship of E-MU's line of Digital Audio Systems, delivering everything you need to produce audio on a PC with professional results- 24-bit/192kHz converters (the same A/D converters used in Digidesign®'s ProTools® HD 192 I/O interface), hardware-accelerated effects and mixing, comprehensive sync options and seamless compatibility with your favorite PC audio/sequencer software. No other audio solution available offers the performance, flexibility and value of the E-MU 1820M.
Studio pakkage contains:
- E-MU 1010 PCI Card
- E-MU AudioDock M 1820M.
- EDI (E-MU Digital Interface) cable (3 meters)
The E-MU 1820M features:
Mastering grade 24-bit/192kHz converters - the same A/D converters used in Digidesign's flagship ProTools HD 192 I/O Interface delivering an amazing 120dB signal-to-noise ratio
Hardware-accelerated effects - over 600 standalone and E-MU Power FX VST plug-in effects with no CPU overhead
PatchMix™ DSP zero-latency hardware mixing and monitoring - with super-flexible patchbay - no external mixer needed
Comprehensive analog and digital I/O plus MIDI and sync - 18 inputs and 20 outputs, two sets of MIDI I/O, Word Clock, SMPTE and MTC Sync, plus FireWire port
Two TFPro™ studio-grade preamps with Mic/Line inputs via Neutrik connectors, 48V phantom power and 40dB of gain - plug microphones, guitars and keyboards straight into your system
Compatibility with most popular audio/sequencer applications - ultra-low latency 24-bit/192kHz ASIO 2.0 and Stereo WDM drivers
Technical Specifications
General
Sample Rates: 44.1, 48, 96, 192kHz from internal crystal or externally supplied clock (no sample rate conversion)
Bit Depths: 24-bit I/O, 32-bit processing
PCI Specification:
- PCI 2.2 Compliant
- Form Factor: Universal Keyed, Short PCI Card
- 3.3V I/O, 5V Tolerant
- PCI Bus-Mastering DMA subsystem reduces CPU usage
E-MU® E-DSP™ 32-bit DSP with 67-bit accumulator (double precision w/ 3 headroom bits)
Hardware-accelerated, 32 channel mixing, and multi-effects processing
Zero-latency direct hardware monitoring w/effects
ASIO 2.0, Stereo WDM/MME/DirectSound Drivers
EDI (E-MU Digital Interface) proprietary 64 channel audio link over CAT-5 cable
Anti-Pop speaker protection minimizes noise during power on/off
Ultra-low jitter clock subsystem: < 1ns in PLL mode (44.1kHz, Opt. S/PDIF Sync)
Analog Line Inputs
Type: servo-balanced, DC-coupled, low-noise input circuitry
A/D converter: AK5394A
Level (software selectable):
- Professional: +4dBu nominal, 20dBu max (balanced)
- Consumer: -10dBV nominal, 6dBV max (unbalanced)
Frequency Response (20Hz-20kHz): +/- 0.05dB
Dynamic Range (1kHz, A-weighted): 120dB
Signal-to-Noise Ratio (A-weighted): 120dB
THD+N (1kHz at -1dBFS): -110dB (.0003%)
Stereo Crosstalk (1kHz at -1dBFS): < -115dB
Analog Line Outputs
Type: balanced, low noise, 3-pole low-pass differential filter
D/A converter: CS4398
Level (software selectable):
- Professional: +4dBu nominal, 20dBu max (balanced)
- Consumer: -10dBV nominal, 6dBV max (unbalanced)
Frequency Response (20Hz - 20kHz): 0.0/-0.35dB
Dynamic Range (1kHz, A-weighted): 120dB
Signal-to-Noise Ratio (A-weighted): 120dB
THD+N (1kHz at -1dBFS): -105dB (.0006%)
Stereo Crosstalk (1kHz at -1dBFS): < -115dB
Combo Microphone Preamplifier/Line Inputs (2)
Type: TFPro™ combination microphone preamp and line input
Frequency Response (20Hz - 20kHz): +0.8/-0.1dB
Dynamic Range (A-weighted, 1kHz min gain): 100dB
Signal-to-Noise Ratio (A-weighted, min gain): 100dB
THD+N (1kHz at -1dBFS, min gain): -94dB (.002%)
Stereo Crosstalk (1kHz min gain, -1dBFS): < -115dB
Line Input:
- Input Impedance: 10Kohm
- Max Level: +17dBV (19.2dBu)
- Gain Range -12 to +28dB
Microphone Preamplifier:
- Input Impedance: 330ohms
- Max Level: -12dBV (-9.8dBu)
- Gain Range: +10 to +50dB
- Phantom Power: 48V
Headphone Amplifier (stereo)
Type: linear power amplifier
D/A converter: CS4398
Gain Range: 85dB
Maximum Output Power: 50mW
Output impedance: 22ohms
Frequency Response (20Hz-20kHz): +0.0/-0.35dB
Dynamic Range (A-weighted): 117dB
Signal-to-Noise Ratio (A-weighted): 117dB
THD+N (1kHz, max gain)
- 33ohm load: -70dB (0.032%)
- 600ohm load: -85dB (0.006%)
Stereo Crosstalk (1kHz at -1dBFS, 600ohm load): < -100dB
Phono Input (stereo)
Type: RIAA equalized phono input
Maximum level:
- Professional: 80mV RMS
- Consumer: 20mV RMS
Input impedance: 47Kohm
Frequency Response (50Hz - 20kHz): +/-0.5dB
Dynamic Range (A-weighted): 91dB
Signal-to-Noise Ratio (10mV RMS unbal input, A-weighted): 91dB
THD+N (1kHz, 10mV RMS unbal input): -76dB (.015%)
Stereo Crosstalk (1kHz at -1dBFS): < -80dB
Digital I/O
S/PDIF:
- 2 in/2 out coaxial (transformer coupled)
- 2 in/4 out optical (software switched with ADAT)
- AES/EBU or S/PDIF format (software selectable)
ADAT:
- 8 channels, 24-bit @ 44.1/48kHz
- 4 channels, 24-bit @ 96kHz (S-MUX compatible)
- 2 channels, 24-bit @ 192kHz
MIDI
- 2 in, 2 out
Firewire
- 400 Mbps 1394a port (6-pin)
- Compatible with DV cameras, storage peripherals, etc.
Synchronization
Internal crystal sync at 44.1, 48, 96, 192kHz
- ADAT (44.1 - 192kHz)
- S/PDIF (opt. or coax 44.1 - 96kHz)
- Word Clock (44.1 - 192kHz) (75ohm termination, switchable via software)
SMPTE/LTC/MTC
- 24, 25, 30 drop-frame, 30 non-drop
- SMPTE to MTC, MTC to SMPTE Conversion
- SMPTE Striping
- Flywheel/Jam/Regenerate