flyweight
Spice up your life with FM and Feedback
Dit is de pre-amp van een combo versterker die ik graag wil modden.
De powersoak heb ik verwijderderd en als ik de pre-amp bypass door de fx return te gebruiken klinkt de amp veel voller.
Daardoor weet ik dat de pre-amp de reden is waarom de amp dun klinkt en niet clean.
Het hele schema staat hier: https://www.thetubestore.com/lib/the...0Schematic.pdf
Hoe kan ik hem cleaner krijgen? Is dat een kwestie van de versterkings factor verminderen?
Als ik het goed begrijp is V1 de driver tube.
Waar doe ik dat dan precies? Kwestie van R13 verlagen?
Ook heb begrepen dat C27, C5 en C28 los kunnen voor een minder agressieve sound. Hiervoor ga ik een switch maken.
Ik gebruik deze combo ook om keys, synths, drums en gitaren door te halen.
Hoe zou ik er een line level input op kunnen maken?
It has been awhile since I modified the Windsor head but this amp also has a lot of brightness and gain in the preamp section. You could get more bass by just removing some of the brightness and this would improve the clean headroom. With all the high frequency gain they added C14 across R34 to cut it before the power tube. You could lift C27, C28 and also C5 if you want, this will lower the overall gain of the preamp section but you still have C37 and C36 for brightness (at approx 800Hz). On the reverb check the RCA cables that go to the tank, the return signal cable is also the ground for the tank so check for corrosion. If you have another RCA cable hooked to the TV or something borough it to try a different cable. If you can hook to an external speaker instead of the one in the combo and the reverb feedback goes away then it is acoustic pickup and you will need to try to isolate the tank better. You can also take the tank out of the cabinet and put it on the floor or a stack of books or whatever to isolate it from the speaker as a test. You could increase the value of C35 to roll off the highs into the tank try a factor of two to 33nf if it is still a problem go to 42nf. For more reverb you could change R50 to 100k you will need to change C44 to 1nf to 500pf also.
Edit: ah het liften van C27, C28 en C5 zou hem ook cleaner maken...
Laatst gewijzigd: