• Het Marktplaats Archief kan als naslagwerk worden gebruikt. Alle advertenties die in het archief staan, zijn gesloten en dus niet meer actief. De aangeboden producten zijn niet meer te koop. Advertenties worden naar dit archief verplaatst als de eigenaar de advertentie heeft gesloten of wanneer er langer dan 30 dagen geen activiteit op een advertentie is geweest.

    Het heeft dus geen zin om de aanbieders te benaderen met vragen over een product dat niet langer te koop wordt aangeboden. Doe dit dan ook niet. Het voorkomt ergernis.

Eurorack: 4ms Dual Looping Delay

Derekvanbeelen

Ingeburgerd
Lid sinds
11 januari 2010
Berichten
92
Een unieke dual delay met looping functie in de aanbieding voor €325,- (excl. verzendkosten)
Verzenden of op te halen in Amsterdam.


The Dual Looping Delay (DLD) is an advanced audio processor for creative synthesis. Not a tape or analog emulation but a modern crystal-clear digital delay, the DLD combines features of delay, looping, and sample-tight synchronization for powerful and dynamic sound capture and modification. The DLD is designed to integrate seamlessly with modular timebase and sequencing devices such as the 4ms Quad Clock Distributor (QCD), etc.

What is a "Looping Delay"?
Modern looping devices grew directly from hardware digital delays of the late 70s and early 80s. A looping delay, modeled on units such as the classic Lexicon PCM42, has the very long storage times associated with dedicated looping, but without triggered record and playback functions.
By default, a looping delay records and plays continuously, though recording can be suspended at any time with Infinite Repeat. Sustain of delays and loops is mainly accomplished with regeneration, allowing an organic, evolving approach to sound creation as new material replaces old, more or less gradually. The 4ms Dual Looping Delay also provides advanced clock input and output facilities that allow for locking delayed and looped material with sequencers and rhythmic devices.

Features :
  • Two independent delay/loop channels, synchronized to a common time base
  • Almost 3 minutes delay/loop time per channel (2:54) in default storage mode (16-bit)
  • 48kHz/16-bit sampling rate, option available for 24-bit storage
  • Extremely quiet, low noise and low jitter design
  • Normaled connections of input and output for flexible use in mono, stereo, or dual mode
  • Tap tempo button and clock Ping input set the basis for one "beat"
  • Delay/loop time set as a number of musical beats (or fractions of beats) using the Time knob, switch, and CV jack
  • Sample-accurate clock output for perfect synchronization
  • Loop clock outputs for each channel
  • Time switches change range of Time knob from 1/8th notes up to 32 bars
  • Digital feedback, up to 110%
  • Delay Level control, independent of dry/wet signal mix
  • Infinite Hold mode disables recording input and fixes regeneration at exactly 100%
  • Reverse mode plays memory contents backwards
  • With an infinite loop locked, knobs or CV can "window" around memory, by shifting the loop
  • Triggered toggle inputs for Infinite Hold and Reverse
  • Send and Return on each channel for feedback with external modules
  • CV jacks to control Time, Level, and Feedback
  • As new features are developed, firmware can be updated by playing an audio file into the DLD
  • 20HP Eurorack module
  • Power consumption: +12V rail: 188mA max (jumper set to 5V) -12V rail: 48mA max +5V rail: not used
 
Back
Top